Land Rover LR3GPS parametersThe Land Rover LR3 has 1 GPS parameter.● Confirmed◆ In testing○ Supported× Not supportedHow to read parameter cardsHow to read a parameter cardSatellites in view LANDROVER_GPS_SATSRequest22 A0 A6Service 22DID A0A6Module754Every60 sTestingBits 72 to 79 of the reply, 8 bits.FormulavalRange0 to 255UnitNumberIn testing for 2004 to 2009.The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.Where the parameter is in the response, and how Pelican converts the raw value into a value.A real reply, decoded. The raw value comes first, then the reading.Which model years have tested this parameter.Satellites in view LANDROVER_GPS_SATSRequest22 A0 A6Service 22DID A0A6Module754Every60 sTestingBits 72 to 79 of the reply, 8 bits.FormulavalRange0 to 255UnitNumberIn testing for 2004 to 2009.
