Pelican
Get the app

Hyundai Veloster

Electrical parameters

The Hyundai Veloster has 1 electrical parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Cluster voltage VELOSTER_CLUSTER_VOLTAGEConfirmed

  • Request22 B0 02
  • Service 22DID B002
  • Module7C6 → 7CE
  • Every10 s
  • Testing for 2011 to 2018, 2022

Example reply from a 2021 Hyundai Veloster.

Bits 40 to 47 of the reply, 8 bits.

0xA5 = 165 → (165 ÷ 12.8) = 12.890625 V

Formula
(val ÷ 12.8)
Range
0 to 18 V
Unit
V

Confirmed for 2019 to 2021. In testing for 2011 to 2016, 2018, 2022. Not supported for 2017.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Cluster voltage VELOSTER_CLUSTER_VOLTAGEConfirmed

  • Request22 B0 02
  • Service 22DID B002
  • Module7C6 → 7CE
  • Every10 s
  • Testing for 2011 to 2018, 2022

Example reply from a 2021 Hyundai Veloster.

Bits 40 to 47 of the reply, 8 bits.

0xA5 = 165 → (165 ÷ 12.8) = 12.890625 V

Formula
(val ÷ 12.8)
Range
0 to 18 V
Unit
V

Confirmed for 2019 to 2021. In testing for 2011 to 2016, 2018, 2022. Not supported for 2017.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.