Pelican
Get the app

Honda CR-Z

Trip parameters

The Honda CR-Z has 1 trip parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Odometer CRZ_ODOConfirmed

Pelican can show this parameter as the odometer.

  • Request22 26 60
  • Service 22DID 2660
  • ModuleDA10 → 10
  • Every5 s
  • Testing for 2010 to 2014, 2016

Bits 344 to 367 of the reply, 24 bits.

Formula
val
Range
0 to 16777215 km
Unit
km

Confirmed for 2015. In testing for 2013 to 2014, 2016.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Odometer CRZ_ODOConfirmed

Pelican can show this parameter as the odometer.

  • Request22 26 60
  • Service 22DID 2660
  • ModuleDA10 → 10
  • Every5 s
  • Testing for 2010 to 2014, 2016

Bits 344 to 367 of the reply, 24 bits.

Formula
val
Range
0 to 16777215 km
Unit
km

Confirmed for 2015. In testing for 2013 to 2014, 2016.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.