Pelican
Get the app

FIAT 500e

Trip parameters

The FIAT 500e has 1 trip parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Odometer 500E_ODO

Pelican can show this parameter as the odometer.

  • Request22 30 27
  • Service 22DID 3027
  • ModuleDA42 → 42
  • Every30 s
  • Testing

Bits 0 to 23 of the reply, 24 bits.

Formula
(val × 32187 ÷ 200000)
Range
0 to 2700041 km
Unit
km

In testing for 2020 to 2026.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Odometer 500E_ODO

Pelican can show this parameter as the odometer.

  • Request22 30 27
  • Service 22DID 3027
  • ModuleDA42 → 42
  • Every30 s
  • Testing

Bits 0 to 23 of the reply, 24 bits.

Formula
(val × 32187 ÷ 200000)
Range
0 to 2700041 km
Unit
km

In testing for 2020 to 2026.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.