Pelican
Get the app

Cupra Leon

Brake parameters

The Cupra Leon has 3 brake parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Brake disk drying active CUPRA_BRK_DRY_ACT

  • Request22 18 0E
  • Service 22DID 180E
  • Module713 → 77D
  • Every5 s
  • Testing

Bit 1 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2020 to 2026.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Brake disk drying active CUPRA_BRK_DRY_ACT

  • Request22 18 0E
  • Service 22DID 180E
  • Module713 → 77D
  • Every5 s
  • Testing

Bit 1 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2020 to 2026.

Brake disk drying last activation distance CUPRA_BRK_DRY_ODO_LAST

  • Request22 18 0E
  • Service 22DID 180E
  • Module713 → 77D
  • Every5 s
  • Testing

Bits 8 to 31 of the reply, 24 bits.

Formula
val
Range
0 to 200000 km
Unit
km

In testing for 2020 to 2026.

Brake pressure CUPRA_BRK_PRESS

  • Request22 18 16
  • Service 22DID 1816
  • Module713 → 77D
  • Every5 s
  • Testing

Bits 8 to 23 of the reply, 16 bits. The value is signed.

Formula
(val ÷ 100)
Range
0 to 327.67 bar
Unit
bar

In testing for 2020 to 2026.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.