Movement parameters
The Chrysler 300 has 4 movement parameters.
● Confirmed◆ In testing○ Supported× Not supported
Odometer at last excess speed event 300_ODO_LAST_OVERSPEED
- Request
22 20 07 - Service 22
DID 2007 - Module
7E0 → 7E8 - Every
3600 s - Testing
Bits 0 to 23 of the reply, 24 bits.
- Formula
(val ÷ 10)- Range
- 0 to 1677721.5 km
- Unit
- km
In testing for 2005 to 2011, 2013 to 2023. Not supported for 2012.
Output shaft speed 300_OUTPUT_SHFT_SPD
- Request
21 CA - Service 21
PID CA - Module
7E0 → 7E8 - Every
5 s - Testing
Bits 64 to 79 of the reply, 16 bits.
- Formula
(val ÷ 8)- Range
- 0 to 8191 rpm
- Unit
- rpm
In testing for 2005 to 2011, 2013 to 2023. Not supported for 2012.
Turbo speed 300_TURBO_SPD
- Request
21 DA - Service 21
PID DA - Module
7E0 → 7E8 - Every
5 s - Testing
Bits 32 to 47 of the reply, 16 bits.
- Formula
(val × 125 ÷ 16)- Range
- 0 to 511992 rpm
- Unit
- rpm
In testing for 2005 to 2011, 2013 to 2023. Not supported for 2012.
Vehicle speed VSSSAE J1979Confirmed
Pelican can show this parameter as the speed.
- Request
01 0D - Service 01
PID 0D - Module
7E0 → 7E8 - Every
250 ms
Bits 0 to 7 of the reply, 8 bits.
- Formula
val- Range
- 0 to 255 km/h
- Unit
- km/h
Confirmed for 2012 to 2013, 2016, 2019, 2022 to 2023. Supported for 2011, 2014 to 2015.