Pelican
Get the app

Chevrolet Traverse

Trip parameters

The Chevrolet Traverse has 2 trip parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Odometer ODOConfirmed

Pelican can show this parameter as the odometer.

  • Request01 A6
  • Service 01PID A6
  • Module7E0 → 7E8
  • Every1 s

Bits 0 to 31 of the reply, 32 bits.

Formula
(val ÷ 10)
Range
0 to 429496729.5 km
Unit
km

Confirmed for 2023.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Odometer ODOSAE J1979Confirmed

Pelican can show this parameter as the odometer.

  • Request01 A6
  • Service 01PID A6
  • Module7E0 → 7E8
  • Every1 s

Bits 0 to 31 of the reply, 32 bits.

Formula
(val ÷ 10)
Range
0 to 429496729.5 km
Unit
km

Confirmed for 2023.

Odometer TRAVERSE_ODO

Pelican can show this parameter as the odometer.

  • Request22 44 8F
  • Service 22DID 448F
  • ModuleDA1A
  • Every30 s
  • Testing

Bits 0 to 31 of the reply, 32 bits.

Formula
(val × 156.25 ÷ 10000)
Range
0 to 1000000 km
Unit
km

In testing for 2009 to 2010, 2013 to 2014, 2017, 2020, 2024 to 2026. Not supported for 2011 to 2012, 2015 to 2016, 2018 to 2019, 2021 to 2023.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.