BMW i5

Transmission parameters

The BMW i5 has 5 transmission parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Current gear I5_GEAR_V2

  • Request22 D0 31
  • Service 22DID D031
  • Module6F1 → 663
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 2026. Not supported for 2024 to 2025.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Current gear I5_GEAR_V2

  • Request22 D0 31
  • Service 22DID D031
  • Module6F1 → 663
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 2026. Not supported for 2024 to 2025.

Shift gear I5_GEAR_SHIFT

  • Request22 DA 2E
  • Service 22DID DA2E
  • Module6F1 → 618
  • Every30 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Unit
Named states
States
Raw valueStateMeaning
0PARKPark
1REVERSEReverse
2NEUTRALNeutral
3DRIVEDrive

In testing for 2026. Not supported for 2024 to 2025.

Torque converter lockup I5_TQ_CNVRT_LOCKUP

  • Request22 DA 22
  • Service 22DID DA22
  • Module6F1 → 618
  • Every1 s
  • Testing

Bits 8 to 15 of the reply, 8 bits.

Unit
Named states
States
Raw valueStateMeaning
0OPENOpen
1CONTROL_LOWControlled low
2CONTROL_HIGHControlled high
3CLOSED_LOWClosed low
4CLOSED_HIGHClosed high
8TRANSITION_OPENTransition to open

In testing for 2026. Not supported for 2024 to 2025.

Torque converter speed I5_TQ_CNVRT_RPM

  • Request22 DA 2A
  • Service 22DID DA2A
  • Module6F1 → 618
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed.

Formula
val
Range
-32768 to 32767 rpm
Unit
rpm

In testing for 2026. Not supported for 2024 to 2025.

Transmission output shaft speed I5_TRANS_SHAFT_RPM

  • Request22 DA 2A
  • Service 22DID DA2A
  • Module6F1 → 618
  • Every1 s
  • Testing

Bits 16 to 31 of the reply, 16 bits. The value is signed.

Formula
val
Range
-32768 to 32767 rpm
Unit
rpm

In testing for 2026. Not supported for 2024 to 2025.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.