Audi Q3

Transmission parameters

The Audi Q3 has 156 transmission parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Air conditioning clutch engagement Q3_PQ35_AC_CLUTCHConfirmed

  • Request22 48 2B
  • Service 22DID 482B
  • Module746 → 7B0
  • Every1 s
  • Testing for 2011 to 2018, 2020, 2022, 2024, 2026

Example reply from a 2025 Audi Q3.

Bits 0 to 7 of the reply, 8 bits.

0xFF = 255 → 255

Formula
val
Range
0 to 255
Unit
Number

Confirmed for 2019, 2021, 2023, 2025. In testing for 2011 to 2012, 2014 to 2016, 2022, 2024, 2026. Not supported for 2013, 2017 to 2018, 2020.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Actual position clutch 1 duty cycle factor 1 Q3_MQB_DQ200_ACTUAL_POS_CLUTCH_1_DUTY_CYCLE_FACTOR_1

  • Request22 38 32
  • Service 22DID 3832
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

Formula
(val ÷ 100)
Range
0 to 100 %
Unit
%

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Actual position clutch 1 duty cycle factor 2 Q3_MQB_DQ200_ACTUAL_POS_CLUTCH_1_DUTY_CYCLE_FACTOR_2

  • Request22 38 33
  • Service 22DID 3833
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val ÷ 100)
Range
0 to 100 %
Unit
%

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Actual position clutch 2 duty cycle factor 1 Q3_MQB_DQ200_ACTUAL_POS_CLUTCH_2_DUTY_CYCLE_FACTOR_1

  • Request22 38 3B
  • Service 22DID 383B
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val ÷ 100)
Range
0 to 100 %
Unit
%

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Actual position clutch 2 duty cycle factor 2 Q3_MQB_DQ200_ACTUAL_POS_CLUTCH_2_DUTY_CYCLE_FACTOR_2

  • Request22 38 3C
  • Service 22DID 383C
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val ÷ 100)
Range
0 to 100 %
Unit
%

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Actual position of gear positioner A Q3_MQB_DQ250_ACUTAL_POS_GEAR_POSER_AConfirmed

  • Request22 38 52
  • Service 22DID 3852
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2021 to 2026

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

Formula
(val × 100 ÷ 10000)
Range
0 to 327.67 mm
Unit
mm

Confirmed for 2019 to 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2021, 2023, 2025.

Actual position of gear positioner B Q3_MQB_DQ250_ACUTAL_POS_GEAR_POSER_BConfirmed

  • Request22 38 5A
  • Service 22DID 385A
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2021 to 2026

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

Formula
(val × 100 ÷ 10000)
Range
0 to 327.67 mm
Unit
mm

Confirmed for 2019 to 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2021, 2023, 2025.

Actual position of gear positioner C Q3_MQB_DQ250_ACUTAL_POS_GEAR_POSER_CConfirmed

  • Request22 38 62
  • Service 22DID 3862
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2021 to 2026

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

Formula
(val × 100 ÷ 10000)
Range
0 to 327.67 mm
Unit
mm

Confirmed for 2019 to 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2021, 2023, 2025.

Actual position of gear positioner D Q3_MQB_DQ250_ACUTAL_POS_GEAR_POSER_DConfirmed

  • Request22 38 6A
  • Service 22DID 386A
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2021 to 2026

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

Formula
(val × 100 ÷ 10000)
Range
0 to 327.67 mm
Unit
mm

Confirmed for 2019 to 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2021, 2023, 2025.

Air conditioning clutch engagement Q3_PQ35_AC_CLUTCHConfirmed

  • Request22 48 2B
  • Service 22DID 482B
  • Module746 → 7B0
  • Every1 s
  • Testing for 2011 to 2018, 2020, 2022, 2024, 2026

Example reply from a 2025 Audi Q3.

Bits 0 to 7 of the reply, 8 bits.

0xFF = 255 → 255

Formula
val
Range
0 to 255
Unit
Number

Confirmed for 2019, 2021, 2023, 2025. In testing for 2011 to 2012, 2014 to 2016, 2022, 2024, 2026. Not supported for 2013, 2017 to 2018, 2020.

All-wheel drive clutch blockage degree Q3_MQB_HAL_CLUTCH_BLOCKConfirmed

  • Request22 18 0A
  • Service 22DID 180A
  • Module713 → 77D
  • Every1 s
  • Testing for 2011 to 2017, 2021 to 2024, 2026

Example reply from a 2025 Audi Q3.

Bit 15 of the reply.

0b0 = 0 → (0 × 8) = 0

Formula
(val × 8)
Range
0 to 1
Unit
Off or on

Confirmed for 2018 to 2020, 2025. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2021, 2023.

All-wheel drive clutch fully open Q3_MQB_HAL_CLUTCH_OPENConfirmed

  • Request22 18 0A
  • Service 22DID 180A
  • Module713 → 77D
  • Every1 s
  • Testing for 2011 to 2017, 2021 to 2024, 2026

Example reply from a 2025 Audi Q3.

Bit 2 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2018 to 2020, 2025. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2021, 2023.

Clutch 0 commanded pressure offset Q3_MQB_DL382_CLUTCH_0_CMD_P_OFFSET

  • Request22 14 26
  • Service 22DID 1426
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed.

Formula
(val ÷ 1000)
Range
-32.768 to 32.767 bar
Unit
bar

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Clutch 1 absolute pressure Q3_MQB_DL382_CLUTCH_1_ABSOLUTE_P

  • Request22 13 CC
  • Service 22DID 13CC
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
(val ÷ 10 − 1)
Range
-1 to 24.5 bar
Unit
bar

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Clutch 1 actual pressure Q3_PQ35_CLUTCH_1_ACTUAL_PConfirmed

  • Request22 38 EB
  • Service 22DID 38EB
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x000F = 15 → (15 ÷ 100) = 0.15 bar

Formula
(val ÷ 100)
Range
-327.68 to 327.67 bar
Unit
bar

Confirmed for 2019 to 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2021, 2023, 2025.

Clutch 1 actual pressure raw value Q3_PQ35_DL382_CLUTCH_1_ACTUAL_P_RAW_VALUEConfirmed

  • Request22 10 F9
  • Service 22DID 10F9
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 7 of the reply, 8 bits.

0x36 = 54 → (54 ÷ 10 − 1) = 4.4 bar

Formula
(val ÷ 10 − 1)
Range
-1 to 24.5 bar
Unit
bar

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Clutch 1 adaptation basic characteristic point 0 moment Q3_PQ35_CLUTCH_1_ADAPT_BASIC_CHARAC_POINT_0_MOMENTConfirmed

  • Request22 10 58
  • Service 22DID 1058
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x0000 = 0 → (0 ÷ 20) = 0 N·m

Formula
(val ÷ 20)
Range
-1638.4 to 1638.35 N·m
Unit
N·m

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 1 adaptation basic characteristic point 0 position Q3_PQ35_CLUTCH_1_ADAPT_BASIC_CHAR_POINT_0_POSConfirmed

  • Request22 10 57
  • Service 22DID 1057
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x00F8 = 248 → (248 ÷ 100) = 2.48 bar

Formula
(val ÷ 100)
Range
-327.68 to 327.67 bar
Unit
bar

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 1 adaptation basic characteristic point 1 moment Q3_PQ35_CLUTCH_1_ADAPT_BASIC_CHARAC_POINT_1_MOMENTConfirmed

  • Request22 10 5A
  • Service 22DID 105A
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x07D0 = 2000 → (2000 ÷ 20) = 100 N·m

Formula
(val ÷ 20)
Range
-1638.4 to 1638.35 N·m
Unit
N·m

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 1 adaptation basic characteristic point 1 position Q3_PQ35_CLUTCH_1_ADAPT_BASIC_CHAR_POINT_1_POSConfirmed

  • Request22 10 59
  • Service 22DID 1059
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x01B7 = 439 → (439 ÷ 100) = 4.39 bar

Formula
(val ÷ 100)
Range
-327.68 to 327.67 bar
Unit
bar

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 1 adaptation basic characteristic point 2 moment Q3_PQ35_CLUTCH_1_ADAPT_BASIC_CHARAC_POINT_2_MOMENTConfirmed

  • Request22 10 5C
  • Service 22DID 105C
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x20D0 = 8400 → (8400 ÷ 20) = 420 N·m

Formula
(val ÷ 20)
Range
-1638.4 to 1638.35 N·m
Unit
N·m

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 1 adaptation basic characteristic point 2 position Q3_PQ35_CLUTCH_1_ADAPT_BASIC_CHAR_POINT_2_POSConfirmed

  • Request22 10 5B
  • Service 22DID 105B
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x03CF = 975 → (975 ÷ 100) = 9.75 bar

Formula
(val ÷ 100)
Range
-327.68 to 327.67 bar
Unit
bar

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 1 adaptation basic characteristic point 3 moment Q3_PQ35_CLUTCH_1_ADAPT_BASIC_CHARAC_POINT_3_MOMENTConfirmed

  • Request22 10 5E
  • Service 22DID 105E
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x2710 = 10000 → (10000 ÷ 20) = 500 N·m

Formula
(val ÷ 20)
Range
-1638.4 to 1638.35 N·m
Unit
N·m

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 1 adaptation basic characteristic point 3 position Q3_PQ35_CLUTCH_1_ADAPT_BASIC_CHAR_POINT_3_POSConfirmed

  • Request22 10 5D
  • Service 22DID 105D
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x0578 = 1400 → (1400 ÷ 100) = 14 bar

Formula
(val ÷ 100)
Range
-327.68 to 327.67 bar
Unit
bar

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 1 adaptation basic characteristics point 0 position Q3_MQB_DQ200_CLUTCH_1_ADAPT_BASIC_CHARS_POINT_0_POS

  • Request22 38 AE
  • Service 22DID 38AE
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Clutch 1 adaptation basic characteristics point 1 position Q3_MQB_DQ200_CLUTCH_1_ADAPT_BASIC_CHARS_POINT_1_POS

  • Request22 38 AF
  • Service 22DID 38AF
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Clutch 1 adaptation basic characteristics point 2 position Q3_MQB_DQ200_CLUTCH_1_ADAPT_BASIC_CHARS_POINT_2_POS

  • Request22 70 00
  • Service 22DID 7000
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Clutch 1 adaptation basic characteristics point 3 position Q3_MQB_DQ200_CLUTCH_1_ADAPT_BASIC_CHARS_POINT_3_POS

  • Request22 70 01
  • Service 22DID 7001
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Clutch 1 adaptation clutch end position closed Q3_MQB_DQ200_CLUTCH_1_ADAPT_CLUTCH_END_POS_CLOSED

  • Request22 38 FF
  • Service 22DID 38FF
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Clutch 1 adaptation clutch end position open Q3_MQB_DQ200_CLUTCH_1_ADAPT_CLUTCH_END_POS_OPEN

  • Request22 38 FE
  • Service 22DID 38FE
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Clutch 1 characteristic curve shift Q3_PQ35_CLUTCH_1_CHAR_CURVE_SHIFTConfirmed

  • Request22 10 63
  • Service 22DID 1063
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x0000 = 0 → (0 × 9.8 ÷ 10000) = 0 mm

Formula
(val × 9.8 ÷ 10000)
Range
-32.11264 to 32.11166 mm
Unit
mm

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 1 commanded pressure Q3_PQ35_CLUTCH_1_CMD_PConfirmed

  • Request22 38 EC
  • Service 22DID 38EC
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x0000 = 0 → (0 ÷ 100) = 0 bar

Formula
(val ÷ 100)
Range
-327.68 to 327.67 bar
Unit
bar

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 1 failed adaptations counter Q3_PQ35_CLUTCH_1_FAILED_ADAPTS_COUNTERConfirmed

  • Request22 10 CC
  • Service 22DID 10CC
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits.

0x0000 = 0 → 0

Formula
val
Range
0 to 65535
Unit
Number

Confirmed for 2019 to 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2021, 2023, 2025.

Clutch 1 friction value correction factor Q3_PQ35_CLUTCH_1_FRICTION_VALUE_CORRECTION_FACTORConfirmed

  • Request22 10 62
  • Service 22DID 1062
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

Formula
(val × 0.09766)
Range
0 to 100 %
Unit
%

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 1 pressure Q3_MQB_DL382_CLUTCH_1_P

  • Request22 21 4C
  • Service 22DID 214C
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
(val ÷ 10 − 1)
Range
-1 to 24.5 bar
Unit
bar

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Clutch 1 protection function engaged quantity Q3_PQ35_CLUTCH_1_PROT_ENGAGED_QTYConfirmed

  • Request22 10 69
  • Service 22DID 1069
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 31 of the reply, 32 bits. The bytes are in little-endian order.

0x00000000 = 0 → 0

Formula
val
Range
0 to 4294967295
Unit
Number

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 1 successful adaptations counter Q3_PQ35_CLUTCH_1_SUCCESSFUL_ADAPTS_COUNTERConfirmed

  • Request22 10 C9
  • Service 22DID 10C9
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x14FF = 5375 → 5,375

Formula
val
Range
0 to 65535
Unit
Number

Confirmed for 2019 to 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2021, 2023, 2025.

Clutch 1 valve current: actual Q3_MQB_DQ250_CLUTCH_1_VALVE_I_ACTUALConfirmed

  • Request22 38 35
  • Service 22DID 3835
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x0000 = 0 → (0 ÷ 10) = 0 mA

Formula
(val ÷ 10)
Range
-3276 to 3276.7 mA
Unit
mA

Confirmed for 2019 to 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2021, 2023, 2025.

Clutch 1 valve current: specified Q3_MQB_DQ250_CLUTCH_1_VALVE_I_SPECIFIEDConfirmed

  • Request22 38 34
  • Service 22DID 3834
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x0000 = 0 → (0 ÷ 10) = 0 mA

Formula
(val ÷ 10)
Range
-3276 to 3276.7 mA
Unit
mA

Confirmed for 2019 to 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2021, 2023, 2025.

Clutch 2 absolute pressure Q3_MQB_DL382_CLUTCH_2_ABSOLUTE_P

  • Request22 13 CD
  • Service 22DID 13CD
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
(val ÷ 10 − 1)
Range
-1 to 24.5 bar
Unit
bar

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Clutch 2 actual pressure Q3_PQ35_CLUTCH_2_ACTUAL_PConfirmed

  • Request22 38 EA
  • Service 22DID 38EA
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x0013 = 19 → (19 ÷ 100) = 0.19 bar

Formula
(val ÷ 100)
Range
-327.68 to 327.67 bar
Unit
bar

Confirmed for 2019 to 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2021, 2023, 2025.

Clutch 2 actual pressure raw value Q3_PQ35_DL382_CLUTCH_2_ACTUAL_P_RAW_VALUE

  • Request22 10 FA
  • Service 22DID 10FA
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
(val ÷ 10 − 1)
Range
-1 to 24.5 bar
Unit
bar

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Clutch 2 actual torque Q3_MQB_TCM_CLUTCH_2_ACTUAL_TORQUEConfirmed

  • Request22 38 39
  • Service 22DID 3839
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0xF830 = -2000 → (-2000 ÷ 20) = -100 N·m

Formula
(val ÷ 20)
Range
-1638.4 to 1638.35 N·m
Unit
N·m

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 2 adaptation basic characteristic point 0 moment Q3_PQ35_CLUTCH_2_ADAPT_BASIC_CHARAC_POINT_0_MOMENTConfirmed

  • Request22 10 6D
  • Service 22DID 106D
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x0000 = 0 → (0 ÷ 20) = 0 N·m

Formula
(val ÷ 20)
Range
-1638.4 to 1638.35 N·m
Unit
N·m

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 2 adaptation basic characteristic point 0 position Q3_PQ35_CLUTCH_2_ADAPT_BASIC_CHAR_POINT_0_POSConfirmed

  • Request22 10 6C
  • Service 22DID 106C
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x0102 = 258 → (258 ÷ 100) = 2.58 bar

Formula
(val ÷ 100)
Range
-327.68 to 327.67 bar
Unit
bar

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 2 adaptation basic characteristic point 1 moment Q3_PQ35_CLUTCH_2_ADAPT_BASIC_CHARAC_POINT_1_MOMENTConfirmed

  • Request22 10 6F
  • Service 22DID 106F
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x07D0 = 2000 → (2000 ÷ 20) = 100 N·m

Formula
(val ÷ 20)
Range
-1638.4 to 1638.35 N·m
Unit
N·m

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 2 adaptation basic characteristic point 1 position Q3_PQ35_CLUTCH_2_ADAPT_BASIC_CHAR_POINT_1_POSConfirmed

  • Request22 10 6E
  • Service 22DID 106E
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x01B9 = 441 → (441 ÷ 100) = 4.41 bar

Formula
(val ÷ 100)
Range
-327.68 to 327.67 bar
Unit
bar

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 2 adaptation basic characteristic point 2 moment Q3_PQ35_CLUTCH_2_ADAPT_BASIC_CHARAC_POINT_2_MOMENTConfirmed

  • Request22 10 71
  • Service 22DID 1071
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x20D0 = 8400 → (8400 ÷ 20) = 420 N·m

Formula
(val ÷ 20)
Range
-1638.4 to 1638.35 N·m
Unit
N·m

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 2 adaptation basic characteristic point 2 position Q3_PQ35_CLUTCH_2_ADAPT_BASIC_CHAR_POINT_2_POSConfirmed

  • Request22 10 70
  • Service 22DID 1070
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x03FF = 1023 → (1023 ÷ 100) = 10.23 bar

Formula
(val ÷ 100)
Range
-327.68 to 327.67 bar
Unit
bar

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 2 adaptation basic characteristic point 3 moment Q3_PQ35_CLUTCH_2_ADAPT_BASIC_CHARAC_POINT_3_MOMENTConfirmed

  • Request22 10 73
  • Service 22DID 1073
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x2710 = 10000 → (10000 ÷ 20) = 500 N·m

Formula
(val ÷ 20)
Range
-1638.4 to 1638.35 N·m
Unit
N·m

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 2 adaptation basic characteristic point 3 position Q3_PQ35_CLUTCH_2_ADAPT_BASIC_CHAR_POINT_3_POSConfirmed

  • Request22 10 72
  • Service 22DID 1072
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x0578 = 1400 → (1400 ÷ 100) = 14 bar

Formula
(val ÷ 100)
Range
-327.68 to 327.67 bar
Unit
bar

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 2 adaptation basic characteristics point 0 position Q3_MQB_DQ200_CLUTCH_2_ADAPT_BASIC_CHARS_POINT_0_POS

  • Request22 38 FA
  • Service 22DID 38FA
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Clutch 2 adaptation basic characteristics point 1 position Q3_MQB_DQ200_CLUTCH_2_ADAPT_BASIC_CHARS_POINT_1_POS

  • Request22 38 FB
  • Service 22DID 38FB
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Clutch 2 adaptation basic characteristics point 2 position Q3_MQB_DQ200_CLUTCH_2_ADAPT_BASIC_CHARS_POINT_2_POS

  • Request22 38 FC
  • Service 22DID 38FC
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Clutch 2 adaptation basic characteristics point 3 position Q3_MQB_DQ200_CLUTCH_2_ADAPT_BASIC_CHARS_POINT_3_POS

  • Request22 38 FD
  • Service 22DID 38FD
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Clutch 2 adaptation clutch end position closed Q3_MQB_DQ200_CLUTCH_2_ADAPT_CLUTCH_END_POS_CLOSED

  • Request22 38 AB
  • Service 22DID 38AB
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Clutch 2 adaptation clutch end position open Q3_MQB_DQ200_CLUTCH_2_ADAPT_CLUTCH_END_POS_OPEN

  • Request22 38 AA
  • Service 22DID 38AA
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Clutch 2 adaptation end position closed Q3_PQ35_CLUTCH_2_ADAPT_END_POS_CLOSEDConfirmed

  • Request22 10 75
  • Service 22DID 1075
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x05DC = 1500 → (1500 ÷ 100) = 15 bar

Formula
(val ÷ 100)
Range
-327.68 to 327.67 bar
Unit
bar

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 2 adaptation end position opened Q3_PQ35_CLUTCH_2_ADAPT_END_POS_OPENEDConfirmed

  • Request22 10 74
  • Service 22DID 1074
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x0000 = 0 → (0 ÷ 100) = 0 bar

Formula
(val ÷ 100)
Range
-327.68 to 327.67 bar
Unit
bar

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 2 characteristic curve shift Q3_PQ35_CLUTCH_2_CHAR_CURVE_SHIFTConfirmed

  • Request22 10 78
  • Service 22DID 1078
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x0000 = 0 → (0 × 9.8 ÷ 10000) = 0 mm

Formula
(val × 9.8 ÷ 10000)
Range
-32.11264 to 32.11166 mm
Unit
mm

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 2 commanded pressure Q3_PQ35_CLUTCH_2_CMD_PConfirmed

  • Request22 38 ED
  • Service 22DID 38ED
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x0000 = 0 → (0 ÷ 100) = 0 bar

Formula
(val ÷ 100)
Range
-327.68 to 327.67 bar
Unit
bar

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 2 failed adaptations counter Q3_PQ35_CLUTCH_2_FAILED_ADAPTS_COUNTERConfirmed

  • Request22 10 ED
  • Service 22DID 10ED
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits.

0x0000 = 0 → 0

Formula
val
Range
0 to 65535
Unit
Number

Confirmed for 2019 to 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2021, 2023, 2025.

Clutch 2 friction value correction factor Q3_MQB_DQ200_CLUTCH_2_FRICTION_VALUE_CORRECTION_FACTORConfirmed

  • Request22 10 77
  • Service 22DID 1077
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed.

0x0004 = 4 → (4 × 0.09766) = 0.39064 %

Formula
(val × 0.09766)
Range
0 to 100 %
Unit
%

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 2 pressure Q3_MQB_DL382_CLUTCH_2_P

  • Request22 21 4D
  • Service 22DID 214D
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
(val ÷ 10 − 1)
Range
-1 to 24.5 bar
Unit
bar

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Clutch 2 protection function engaged quantity Q3_PQ35_CLUTCH_2_PROT_ENGAGED_QTYConfirmed

  • Request22 10 7E
  • Service 22DID 107E
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 31 of the reply, 32 bits. The bytes are in little-endian order.

0x00000006 = 6 → 6

Formula
val
Range
0 to 4294967295
Unit
Number

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Clutch 2 successful adaptations counter Q3_PQ35_CLUTCH_2_SUCCESSFUL_ADAPTS_COUNTERConfirmed

  • Request22 10 EA
  • Service 22DID 10EA
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x1018 = 4120 → 4,120

Formula
val
Range
0 to 65535
Unit
Number

Confirmed for 2019 to 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2021, 2023, 2025.

Clutch 2 valve current: actual Q3_MQB_DQ250_CLUTCH_2_VALVE_I_ACTUALConfirmed

  • Request22 38 3E
  • Service 22DID 383E
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x0000 = 0 → (0 ÷ 10) = 0 mA

Formula
(val ÷ 10)
Range
0 to 3276.7 mA
Unit
mA

Confirmed for 2019 to 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2021, 2023, 2025.

Clutch 2 valve current: specified Q3_MQB_DQ250_CLUTCH_2_VALVE_I_SPECIFIEDConfirmed

  • Request22 38 3D
  • Service 22DID 383D
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x0000 = 0 → (0 ÷ 10) = 0 mA

Formula
(val ÷ 10)
Range
0 to 3276.7 mA
Unit
mA

Confirmed for 2019 to 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2021, 2023, 2025.

Clutch adaptation values initial kill point 0 for K1 Q3_MQB_DQ250_CLUTCH_ADAPT_VALUES_IKP0_K1Confirmed

  • Request22 11 56
  • Service 22DID 1156
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 7 of the reply, 8 bits.

0x35 = 53 → (53 × 5) = 265 mA

Formula
(val × 5)
Range
0 to 1275 mA
Unit
mA

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Clutch adaptation values initial kill point 0 for K2 Q3_MQB_DQ250_CLUTCH_ADAPT_VALUES_IKP0_K2Confirmed

  • Request22 11 57
  • Service 22DID 1157
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 7 of the reply, 8 bits.

0x2E = 46 → (46 × 5) = 230 mA

Formula
(val × 5)
Range
0 to 1275 mA
Unit
mA

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Clutch adaptation values lower current point adaptation K1 Q3_MQB_DQ250_CLUTCH_ADAPT_VALUES_LOWER_I_POINT_ADAPT_K1Confirmed

  • Request22 11 58
  • Service 22DID 1158
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 7 of the reply, 8 bits.

0x2B = 43 → (43 × 5) = 215 mA

Formula
(val × 5)
Range
0 to 1275 mA
Unit
mA

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Clutch adaptation values lower current point adaptation K2 Q3_MQB_DQ250_CLUTCH_ADAPT_VALUES_LOWER_I_POINT_ADAPT_K2Confirmed

  • Request22 11 59
  • Service 22DID 1159
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 7 of the reply, 8 bits.

0x29 = 41 → (41 × 5) = 205 mA

Formula
(val × 5)
Range
0 to 1275 mA
Unit
mA

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Clutch kisspoint rapid adaptation remaining Q3_PQ35_CLUTCH_KISSPOINT_RAPID_ADAPT_REMAININGConfirmed

  • Request22 17 11
  • Service 22DID 1711
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x0000 = 0 → 0 km

Formula
val
Range
0 to 65535 km
Unit
km

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Correction values for main press adaptation: high press on clutch 1 Q3_MQB_DQ250_CORRECTION_VALUES_MAIN_P_ADAPT_HIGH_P_ON_CLUTCH_1Confirmed

  • Request22 11 81
  • Service 22DID 1181
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x0019 = 25 → (25 ÷ 100) = 0.25 bar

Formula
(val ÷ 100)
Range
-327.68 to 327.67 bar
Unit
bar

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Correction values for main press adaptation: low press on clutch 1 Q3_MQB_DQ250_CORRECTION_VALUES_MAIN_P_ADAPT_LOW_P_ON_CLUTCH_1Confirmed

  • Request22 11 80
  • Service 22DID 1180
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x0014 = 20 → (20 ÷ 100) = 0.2 bar

Formula
(val ÷ 100)
Range
-327.68 to 327.67 bar
Unit
bar

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Correction values for main pressure adaptation high pressure on clutch 2 Q3_MQB_DQ250_CORRECTION_VALUES_MAIN_P_ADAPT_HIGH_P_ON_CLUTCH_2Confirmed

  • Request22 11 83
  • Service 22DID 1183
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x0014 = 20 → (20 ÷ 100) = 0.2 bar

Formula
(val ÷ 100)
Range
-327.68 to 327.67 bar
Unit
bar

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Correction values for main pressure adaptation low pressure on clutch 2 Q3_MQB_DQ250_CORRECTION_VALUES_MAIN_P_ADAPT_LOW_P_ON_CLUTCH_2Confirmed

  • Request22 11 82
  • Service 22DID 1182
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x000F = 15 → (15 ÷ 100) = 0.15 bar

Formula
(val ÷ 100)
Range
-327.68 to 327.67 bar
Unit
bar

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Current gear Q3_MQB_TCM_I_GEARConfirmed

  • Request22 21 0F
  • Service 22DID 210F
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2020, 2022, 2024, 2026

Example reply from a 2025 Audi Q3.

Bits 0 to 7 of the reply, 8 bits.

0x02 = 2 → (2 − 2) = 0

Formula
(val − 2)
Range
-2 to 253
Unit
Number

Confirmed for 2021, 2023, 2025. In testing for 2011 to 2012, 2014 to 2016, 2024, 2026. Not supported for 2013, 2017 to 2020, 2022.

Current gear Q3_MQB_TCM_I_GEAR_DQ200Confirmed

  • Request22 38 16
  • Service 22DID 3816
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2022, 2024, 2026

Example reply from a 2025 Audi Q3.

Bits 0 to 7 of the reply, 8 bits.

0x02 = 2 → (2 − 2) = 0

Formula
(val − 2)
Range
-2 to 253
Unit
Number

Confirmed for 2019 to 2021, 2023, 2025. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018.

Current gear Q3_PQ35_GEARConfirmed

  • Request22 10 0D
  • Service 22DID 100D
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2011 to 2012, 2014 to 2026

Example reply from a 2013 Audi Q3.

Bits 0 to 7 of the reply, 8 bits. The value is signed.

0x00 = 0 → 0

Formula
val
Range
-128 to 127
Unit
Number

Confirmed for 2013. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2018 to 2021, 2023, 2025.

Current lower pressure point clutch 1 from current to pressure adaptation Q3_MQB_DQ250_I_LOWER_P_POINT_CLUTCH_1_FROM_I_TO_P_ADAPTConfirmed

  • Request22 11 30
  • Service 22DID 1130
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 7 of the reply, 8 bits.

0x2B = 43 → (43 × 5) = 215 mA

Formula
(val × 5)
Range
0 to 1275 mA
Unit
mA

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Current lower pressure point clutch 2 from current to pressure adaptation Q3_MQB_DQ250_I_LOWER_P_POINT_CLUTCH_2_FROM_I_TO_P_ADAPTConfirmed

  • Request22 11 32
  • Service 22DID 1132
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 7 of the reply, 8 bits.

0x29 = 41 → (41 × 5) = 205 mA

Formula
(val × 5)
Range
0 to 1275 mA
Unit
mA

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Current upper pressure point clutch 1 from current to pressure adaptation Q3_MQB_DQ250_I_UPPER_P_POINT_CLUTCH_1_FROM_I_TO_P_ADAPTConfirmed

  • Request22 11 31
  • Service 22DID 1131
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 7 of the reply, 8 bits.

0xC8 = 200 → (200 × 5) = 1,000 mA

Formula
(val × 5)
Range
0 to 1275 mA
Unit
mA

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Current upper pressure point clutch 2 from current to pressure adaptation Q3_MQB_DQ250_I_UPPER_P_POINT_CLUTCH_2_FROM_I_TO_P_ADAPTConfirmed

  • Request22 11 33
  • Service 22DID 1133
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 7 of the reply, 8 bits.

0xC8 = 200 → (200 × 5) = 1,000 mA

Formula
(val × 5)
Range
0 to 1275 mA
Unit
mA

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Driving strategy mountain factor Q3_PQ35_DRIVING_STRATEGY_MOUNTAIN_FACTORConfirmed

  • Request22 10 18
  • Service 22DID 1018
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 7 of the reply, 8 bits.

0x00 = 0 → (0 × 100 ÷ 255) = 0 %

Formula
(val × 100 ÷ 255)
Range
0 to 100 %
Unit
%

Confirmed for 2019 to 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2021, 2023, 2025.

Driving strategy sport factor Q3_PQ35_DRIVING_STRATEGY_SPORT_FACTORConfirmed

  • Request22 10 19
  • Service 22DID 1019
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 7 of the reply, 8 bits.

0x00 = 0 → (0 × 1700 ÷ 255) = 0 %

Formula
(val × 1700 ÷ 255)
Range
0 to 100 %
Unit
%

Confirmed for 2019 to 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2021, 2023, 2025.

Engaged position side A gear selector 1-3 Q3_MQB_DQ250_ENGAGED_POS_SIDE_A_GEAR_SELECTOR_1_3Confirmed

  • Request22 11 38
  • Service 22DID 1138
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x0000 = 0 → (0 × 100 ÷ 10000) = 0 %

Formula
(val × 100 ÷ 10000)
Range
0 to 655.35 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Engaged position side A gear selector 2-4 Q3_MQB_DQ250_ENGAGED_POS_SIDE_A_GEAR_SELECTOR_2_4Confirmed

  • Request22 11 39
  • Service 22DID 1139
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x0000 = 0 → (0 × 100 ÷ 10000) = 0 %

Formula
(val × 100 ÷ 10000)
Range
0 to 655.35 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Engaged position side A gear selector 5-N Q3_MQB_DQ250_ENGAGED_POS_SIDE_A_GEAR_SELECTOR_5_NConfirmed

  • Request22 11 3A
  • Service 22DID 113A
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x0000 = 0 → (0 × 100 ÷ 10000) = 0 %

Formula
(val × 100 ÷ 10000)
Range
0 to 655.35 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Engaged position side A gear selector 6-R Q3_MQB_DQ250_ENGAGED_POS_SIDE_A_GEAR_SELECTOR_6_RConfirmed

  • Request22 11 3B
  • Service 22DID 113B
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x0000 = 0 → (0 × 100 ÷ 10000) = 0 %

Formula
(val × 100 ÷ 10000)
Range
0 to 655.35 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Engaged position side B gear selector 1-3 Q3_MQB_DQ250_ENGAGED_POS_SIDE_B_GEAR_SELECTOR_1_3Confirmed

  • Request22 11 44
  • Service 22DID 1144
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x0000 = 0 → (0 × 100 ÷ 10000) = 0 %

Formula
(val × 100 ÷ 10000)
Range
0 to 655.35 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Engaged position side B gear selector 2-4 Q3_MQB_DQ250_ENGAGED_POS_SIDE_B_GEAR_SELECTOR_2_4Confirmed

  • Request22 11 45
  • Service 22DID 1145
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x0000 = 0 → (0 × 100 ÷ 10000) = 0 %

Formula
(val × 100 ÷ 10000)
Range
0 to 655.35 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Engaged position side B gear selector 5-N Q3_MQB_DQ250_ENGAGED_POS_SIDE_B_GEAR_SELECTOR_5_NConfirmed

  • Request22 11 46
  • Service 22DID 1146
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x0000 = 0 → (0 × 100 ÷ 10000) = 0 %

Formula
(val × 100 ÷ 10000)
Range
0 to 655.35 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Engaged position side B gear selector 6-R Q3_MQB_DQ250_ENGAGED_POS_SIDE_B_GEAR_SELECTOR_6_RConfirmed

  • Request22 11 47
  • Service 22DID 1147
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x0000 = 0 → (0 × 100 ÷ 10000) = 0 %

Formula
(val × 100 ÷ 10000)
Range
0 to 655.35 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Gear actuator adaptation engaged position G1 Q3_PQ35_GEAR_ACTUATOR_ADAPT_ENGAGED_POS_G1Confirmed

  • Request22 10 82
  • Service 22DID 1082
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0xFC95 = -875 → (-875 ÷ 100) = -8.75 mm

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Gear actuator adaptation engaged position G2 Q3_PQ35_GEAR_ACTUATOR_ADAPT_ENGAGED_POS_G2Confirmed

  • Request22 10 90
  • Service 22DID 1090
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0xFC74 = -908 → (-908 ÷ 100) = -9.08 mm

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Gear actuator adaptation engaged position G3 Q3_PQ35_GEAR_ACTUATOR_ADAPT_ENGAGED_POS_G3Confirmed

  • Request22 10 86
  • Service 22DID 1086
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x035F = 863 → (863 ÷ 100) = 8.63 mm

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Gear actuator adaptation engaged position G4 Q3_PQ35_GEAR_ACTUATOR_ADAPT_ENGAGED_POS_G4Confirmed

  • Request22 10 94
  • Service 22DID 1094
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x03A1 = 929 → (929 ÷ 100) = 9.29 mm

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Gear actuator adaptation engaged position G5 Q3_PQ35_GEAR_ACTUATOR_ADAPT_ENGAGED_POS_G5Confirmed

  • Request22 10 9E
  • Service 22DID 109E
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x0345 = 837 → (837 ÷ 100) = 8.37 mm

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Gear actuator adaptation engaged position G6 Q3_PQ35_GEAR_ACTUATOR_ADAPT_ENGAGED_POS_G6Confirmed

  • Request22 10 AC
  • Service 22DID 10AC
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x033C = 828 → (828 ÷ 100) = 8.28 mm

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Gear actuator adaptation engaged position G7 Q3_PQ35_GEAR_ACTUATOR_ADAPT_ENGAGED_POS_G7Confirmed

  • Request22 10 A2
  • Service 22DID 10A2
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0xFCB8 = -840 → (-840 ÷ 100) = -8.4 mm

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Gear actuator adaptation engaged position GR Q3_PQ35_GEAR_ACTUATOR_ADAPT_ENGAGED_POS_GRConfirmed

  • Request22 10 B0
  • Service 22DID 10B0
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020, 2022, 2024, 2026

Example reply from a 2025 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x3200 = 12800 → (12800 ÷ 100) = 128 mm

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

Confirmed for 2019, 2021, 2023, 2025. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020.

Gear actuator adaptation synchronization position G1 Q3_PQ35_GEAR_ACTUATOR_ADAPT_SYNCHRO_POS_G1Confirmed

  • Request22 10 83
  • Service 22DID 1083
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0xFED8 = -296 → (-296 ÷ 100) = -2.96 mm

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Gear actuator adaptation synchronization position G2 Q3_PQ35_GEAR_ACTUATOR_ADAPT_SYNCHRO_POS_G2Confirmed

  • Request22 10 91
  • Service 22DID 1091
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0xFF0C = -244 → (-244 ÷ 100) = -2.44 mm

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Gear actuator adaptation synchronization position G3 Q3_PQ35_GEAR_ACTUATOR_ADAPT_SYNCHRO_POS_G3Confirmed

  • Request22 10 85
  • Service 22DID 1085
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x00C8 = 200 → (200 ÷ 100) = 2 mm

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Gear actuator adaptation synchronization position G4 Q3_PQ35_GEAR_ACTUATOR_ADAPT_SYNCHRO_POS_G4Confirmed

  • Request22 10 93
  • Service 22DID 1093
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x00C4 = 196 → (196 ÷ 100) = 1.96 mm

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Gear actuator adaptation synchronization position G5 Q3_PQ35_GEAR_ACTUATOR_ADAPT_SYNCHRO_POS_G5Confirmed

  • Request22 10 9F
  • Service 22DID 109F
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x0061 = 97 → (97 ÷ 100) = 0.97 mm

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Gear actuator adaptation synchronization position G6 Q3_PQ35_GEAR_ACTUATOR_ADAPT_SYNCHRO_POS_G6Confirmed

  • Request22 10 AD
  • Service 22DID 10AD
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x00A0 = 160 → (160 ÷ 100) = 1.6 mm

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Gear actuator adaptation synchronization position G7 Q3_PQ35_GEAR_ACTUATOR_ADAPT_SYNCHRO_POS_G7Confirmed

  • Request22 10 A1
  • Service 22DID 10A1
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0xFF4D = -179 → (-179 ÷ 100) = -1.79 mm

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Gear actuator adaptation synchronization position reverse Q3_PQ35_GEAR_ACTUATOR_ADAPT_SYNCHRO_POS_GRConfirmed

  • Request22 10 AF
  • Service 22DID 10AF
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020, 2022, 2024, 2026

Example reply from a 2025 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x1E00 = 7680 → (7680 ÷ 100) = 76.8 mm

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

Confirmed for 2019, 2021, 2023, 2025. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020.

Gear selector a adaptation neutral position Q3_PQ35_GANGSTELLER_A_ADAPT_NEUTRALPOSConfirmed

  • Request22 10 84
  • Service 22DID 1084
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0xFFAB = -85 → (-85 ÷ 100) = -0.85 mm

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Gear selector b adaptation neutral position Q3_PQ35_GANGSTELLER_B_ADAPT_NEUTRALPOSConfirmed

  • Request22 10 92
  • Service 22DID 1092
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0xFFE1 = -31 → (-31 ÷ 100) = -0.31 mm

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Gear selector c adaptation neutral position Q3_PQ35_GANGSTELLER_C_ADAPT_NEUTRALPOSConfirmed

  • Request22 10 A0
  • Service 22DID 10A0
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0xFFF0 = -16 → (-16 ÷ 100) = -0.16 mm

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Gear selector d adaptation neutral position Q3_PQ35_GANGSTELLER_D_ADAPT_NEUTRALPOSConfirmed

  • Request22 10 AE
  • Service 22DID 10AE
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0xFFEB = -21 → (-21 ÷ 100) = -0.21 mm

Formula
(val ÷ 100)
Range
-327.68 to 327.67 mm
Unit
mm

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Gear selector synchronous position G-R Q3_MQB_DQ250_GEAR_SELECTOR_SYNCHRONOUS_POS_G_RConfirmed

  • Request22 11 7F
  • Service 22DID 117F
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x120B = 4619 → (4619 ÷ 100) = 46.19 %

Formula
(val ÷ 100)
Range
0 to 327.67 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Gear selector synchronous position G1 Q3_MQB_DQ250_GEAR_SELECTOR_SYNCHRONOUS_POS_G1Confirmed

  • Request22 11 79
  • Service 22DID 1179
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x1559 = 5465 → (5465 ÷ 100) = 54.65 %

Formula
(val ÷ 100)
Range
0 to 327.67 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Gear selector synchronous position G2 Q3_MQB_DQ250_GEAR_SELECTOR_SYNCHRONOUS_POS_G2Confirmed

  • Request22 11 7A
  • Service 22DID 117A
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x11EC = 4588 → (4588 ÷ 100) = 45.88 %

Formula
(val ÷ 100)
Range
0 to 327.67 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Gear selector synchronous position G3 Q3_MQB_DQ250_GEAR_SELECTOR_SYNCHRONOUS_POS_G3Confirmed

  • Request22 11 7B
  • Service 22DID 117B
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x11CB = 4555 → (4555 ÷ 100) = 45.55 %

Formula
(val ÷ 100)
Range
0 to 327.67 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Gear selector synchronous position G4 Q3_MQB_DQ250_GEAR_SELECTOR_SYNCHRONOUS_POS_G4Confirmed

  • Request22 11 7C
  • Service 22DID 117C
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x155A = 5466 → (5466 ÷ 100) = 54.66 %

Formula
(val ÷ 100)
Range
0 to 327.67 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Gear selector synchronous position G5 Q3_MQB_DQ250_GEAR_SELECTOR_SYNCHRONOUS_POS_G5Confirmed

  • Request22 11 7D
  • Service 22DID 117D
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x1505 = 5381 → (5381 ÷ 100) = 53.81 %

Formula
(val ÷ 100)
Range
0 to 327.67 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Gear selector synchronous position G6 Q3_MQB_DQ250_GEAR_SELECTOR_SYNCHRONOUS_POS_G6Confirmed

  • Request22 11 7E
  • Service 22DID 117E
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x14F6 = 5366 → (5366 ÷ 100) = 53.66 %

Formula
(val ÷ 100)
Range
0 to 327.67 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Input shaft 1 Q3_MQB_INPUT_SHAFT_1Confirmed

  • Request22 38 0C
  • Service 22DID 380C
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x0000 = 0 → 0 rpm

Formula
val
Range
-32768 to 32767 rpm
Unit
rpm

Confirmed for 2019 to 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2021, 2023, 2025.

Input shaft 2 Q3_MQB_INPUT_SHAFT_2Confirmed

  • Request22 38 0D
  • Service 22DID 380D
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x0000 = 0 → 0 rpm

Formula
val
Range
-32768 to 32767 rpm
Unit
rpm

Confirmed for 2019 to 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2021, 2023, 2025.

Lower adapted coupling point clutch 1 from kiss point adaptation Q3_MQB_DQ250_LOWER_ADAPTED_COUPLING_POINT_CLUTCH_1_FROM_KISS_POINT_ADAPTConfirmed

  • Request22 38 8D
  • Service 22DID 388D
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 7 of the reply, 8 bits.

0x35 = 53 → (53 ÷ 200) = 0.265 A

Formula
(val ÷ 200)
Range
0 to 1.275 A
Unit
A

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Lower adapted coupling point clutch 2 from kiss point adaptation Q3_MQB_DQ250_LOWER_ADAPTED_COUPLING_POINT_CLUTCH_2_FROM_KISS_POINT_ADAPTConfirmed

  • Request22 38 8E
  • Service 22DID 388E
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 7 of the reply, 8 bits.

0x2E = 46 → (46 ÷ 200) = 0.23 A

Formula
(val ÷ 200)
Range
0 to 1.275 A
Unit
A

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Neutral position gear selector 1-3 Q3_MQB_DQ250_NEUTRAL_POS_GEAR_SELECTOR_1_3Confirmed

  • Request22 11 40
  • Service 22DID 1140
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x1372 = 4978 → (4978 × 100 ÷ 10000) = 49.78 %

Formula
(val × 100 ÷ 10000)
Range
0 to 655.35 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Neutral position gear selector 2-4 Q3_MQB_DQ250_NEUTRAL_POS_GEAR_SELECTOR_2_4Confirmed

  • Request22 11 41
  • Service 22DID 1141
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x1386 = 4998 → (4998 × 100 ÷ 10000) = 49.98 %

Formula
(val × 100 ÷ 10000)
Range
0 to 655.35 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Neutral position gear selector 5-N Q3_MQB_DQ250_NEUTRAL_POS_GEAR_SELECTOR_5_NConfirmed

  • Request22 11 42
  • Service 22DID 1142
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x135F = 4959 → (4959 × 100 ÷ 10000) = 49.59 %

Formula
(val × 100 ÷ 10000)
Range
0 to 655.35 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Neutral position gear selector 6-R Q3_MQB_DQ250_NEUTRAL_POS_GEAR_SELECTOR_6_RConfirmed

  • Request22 11 43
  • Service 22DID 1143
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x13AC = 5036 → (5036 × 100 ÷ 10000) = 50.36 %

Formula
(val × 100 ÷ 10000)
Range
0 to 655.35 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Output shaft 1 Q3_MQB_OUTPUT_SHAFT_1Confirmed

  • Request22 38 0E
  • Service 22DID 380E
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0x0000 = 0 → 0 rpm

Formula
val
Range
-32768 to 32767 rpm
Unit
rpm

Confirmed for 2019 to 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2021, 2023, 2025.

Output shaft 2 Q3_MQB_OUTPUT_SHAFT_2Confirmed

  • Request22 38 0F
  • Service 22DID 380F
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed.

0x0000 = 0 → 0 rpm

Formula
val
Range
-32768 to 32767 rpm
Unit
rpm

Confirmed for 2019 to 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2021, 2023, 2025.

Road resistance Q3_PQ35_ROAD_RESISTANCEConfirmed

  • Request22 10 17
  • Service 22DID 1017
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 7 of the reply, 8 bits.

0x7F = 127 → (127 × 24.9 ÷ 100 − 31.6) = 0.023 %

Formula
(val × 24.9 ÷ 100 − 31.6)
Range
-31 to 31.895 %
Unit
%

Confirmed for 2019 to 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2021, 2023, 2025.

Selected gear Q3_PQ35_SELECTED_GEARConfirmed

  • Request22 15 AA
  • Service 22DID 15AA
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2011 to 2012, 2014 to 2026

Example reply from a 2013 Audi Q3.

Bits 0 to 7 of the reply, 8 bits.

0x00 = 0 → 0

Formula
val
Range
0 to 255
Unit
Number

Confirmed for 2013. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2018 to 2021, 2023, 2025.

Specified torque clutch 1 Q3_MQB_DQ250_SPECIFIED_TORQUE_CLUTCH_1Confirmed

  • Request22 38 2E
  • Service 22DID 382E
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2021 to 2026

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

Formula
(val × 5 ÷ 100)
Range
0 to 1638.35 N·m
Unit
N·m

Confirmed for 2019 to 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2021, 2023, 2025.

Specified torque clutch 2 Q3_MQB_DQ250_SPECIFIED_TORQUE_CLUTCH_2Confirmed

  • Request22 38 38
  • Service 22DID 3838
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

0xD120 = -12000 → (-12000 × 5 ÷ 100) = -600 N·m

Formula
(val × 5 ÷ 100)
Range
-1638 to 1638.35 N·m
Unit
N·m

Confirmed for 2019 to 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2021, 2023, 2025.

Stiffness point pressure clutch 1 Q3_MQB_DL382_STIFFNESS_POINT_P_CLUTCH_1

  • Request22 14 19
  • Service 22DID 1419
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed.

Formula
(val ÷ 1000)
Range
-32.768 to 32.767 bar
Unit
bar

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Stiffness point pressure clutch 2 Q3_MQB_DL382_STIFFNESS_POINT_P_CLUTCH_2

  • Request22 14 1A
  • Service 22DID 141A
  • Module7E1 → 7E9
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed.

Formula
(val ÷ 1000)
Range
-32.768 to 32.767 bar
Unit
bar

In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2021, 2023, 2025.

Synchronous position side A gear selector 1-3 Q3_MQB_DQ250_SYNCHRONOUS_POS_SIDE_A_GEAR_SELECTOR_1_3Confirmed

  • Request22 11 3C
  • Service 22DID 113C
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x11CB = 4555 → (4555 × 100 ÷ 10000) = 45.55 %

Formula
(val × 100 ÷ 10000)
Range
0 to 655.35 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Synchronous position side A gear selector 2-4 Q3_MQB_DQ250_SYNCHRONOUS_POS_SIDE_A_GEAR_SELECTOR_2_4Confirmed

  • Request22 11 3D
  • Service 22DID 113D
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x11EC = 4588 → (4588 × 100 ÷ 10000) = 45.88 %

Formula
(val × 100 ÷ 10000)
Range
0 to 655.35 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Synchronous position side A gear selector 5-N Q3_MQB_DQ250_SYNCHRONOUS_POS_SIDE_A_GEAR_SELECTOR_5_NConfirmed

  • Request22 11 3E
  • Service 22DID 113E
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x1374 = 4980 → (4980 × 100 ÷ 10000) = 49.8 %

Formula
(val × 100 ÷ 10000)
Range
0 to 655.35 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Synchronous position side A gear selector 6-R Q3_MQB_DQ250_SYNCHRONOUS_POS_SIDE_A_GEAR_SELECTOR_6_RConfirmed

  • Request22 11 3F
  • Service 22DID 113F
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x120B = 4619 → (4619 × 100 ÷ 10000) = 46.19 %

Formula
(val × 100 ÷ 10000)
Range
0 to 655.35 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Synchronous position side B gear selector 1-3 Q3_MQB_DQ250_SYNCHRONOUS_POS_SIDE_B_GEAR_SELECTOR_1_3Confirmed

  • Request22 11 48
  • Service 22DID 1148
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x1559 = 5465 → (5465 × 100 ÷ 10000) = 54.65 %

Formula
(val × 100 ÷ 10000)
Range
0 to 655.35 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Synchronous position side B gear selector 2-4 Q3_MQB_DQ250_SYNCHRONOUS_POS_SIDE_B_GEAR_SELECTOR_2_4Confirmed

  • Request22 11 49
  • Service 22DID 1149
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x155A = 5466 → (5466 × 100 ÷ 10000) = 54.66 %

Formula
(val × 100 ÷ 10000)
Range
0 to 655.35 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Synchronous position side B gear selector 5-N Q3_MQB_DQ250_SYNCHRONOUS_POS_SIDE_B_GEAR_SELECTOR_5_NConfirmed

  • Request22 11 4A
  • Service 22DID 114A
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x1505 = 5381 → (5381 × 100 ÷ 10000) = 53.81 %

Formula
(val × 100 ÷ 10000)
Range
0 to 655.35 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Synchronous position side B gear selector 6-R Q3_MQB_DQ250_SYNCHRONOUS_POS_SIDE_B_GEAR_SELECTOR_6_RConfirmed

  • Request22 11 4B
  • Service 22DID 114B
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x14F6 = 5366 → (5366 × 100 ÷ 10000) = 53.66 %

Formula
(val × 100 ÷ 10000)
Range
0 to 655.35 %
Unit
%

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Torque converter lockup clutch status Q3_MQB_TCM_TORQUE_CONVERTER_LOCKUP_CLUTCH_STATUSConfirmed

  • Request22 70 78
  • Service 22DID 7078
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2020, 2022, 2024, 2026

Example reply from a 2025 Audi Q3.

Bits 0 to 7 of the reply, 8 bits.

0x00 = 0 → 0

Formula
val
Range
0 to 255
Unit
Number

Confirmed for 2021, 2023, 2025. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2020.

Transmission part 1 pressure actual Q3_MQB_TCM_TRANSMISSION_PART_1_P_ACTUALConfirmed

  • Request22 38 21
  • Service 22DID 3821
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x0017 = 23 → (23 ÷ 100) = 0.23 bar

Formula
(val ÷ 100)
Range
0 to 655.35 bar
Unit
bar

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Transmission part 1 pressure commanded Q3_MQB_TCM_TRANSMISSION_PART_1_P_CMDConfirmed

  • Request22 38 20
  • Service 22DID 3820
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x00FA = 250 → (250 ÷ 100) = 2.5 bar

Formula
(val ÷ 100)
Range
0 to 655.35 bar
Unit
bar

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Transmission part 1 valve current actual Q3_MQB_TCM_TRANSMISSION_PART_1_VALVE_I_ACTUALConfirmed

  • Request22 38 27
  • Service 22DID 3827
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x0D7A = 3450 → (3450 ÷ 10) = 345 mA

Formula
(val ÷ 10)
Range
0 to 6553.5 mA
Unit
mA

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Transmission part 1 valve current commanded Q3_MQB_TCM_TRANSMISSION_PART_1_VALVE_I_CMDConfirmed

  • Request22 38 26
  • Service 22DID 3826
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x0D7D = 3453 → (3453 ÷ 10) = 345.3 mA

Formula
(val ÷ 10)
Range
0 to 6553.5 mA
Unit
mA

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Transmission part 2 pressure actual Q3_MQB_TCM_TRANSMISSION_PART_2_P_ACTUALConfirmed

  • Request22 38 24
  • Service 22DID 3824
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x0017 = 23 → (23 ÷ 100) = 0.23 bar

Formula
(val ÷ 100)
Range
0 to 655.35 bar
Unit
bar

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Transmission part 2 pressure commanded Q3_MQB_TCM_TRANSMISSION_PART_2_P_CMDConfirmed

  • Request22 38 23
  • Service 22DID 3823
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x00FA = 250 → (250 ÷ 100) = 2.5 bar

Formula
(val ÷ 100)
Range
0 to 655.35 bar
Unit
bar

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Transmission part 2 valve current actual Q3_MQB_TCM_TRANSMISSION_PART_2_VALVE_I_ACTUALConfirmed

  • Request22 38 2B
  • Service 22DID 382B
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x0DDE = 3550 → (3550 ÷ 10) = 355 mA

Formula
(val ÷ 10)
Range
0 to 6553.5 mA
Unit
mA

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Transmission part 2 valve current commanded Q3_MQB_TCM_TRANSMISSION_PART_2_VALVE_I_CMDConfirmed

  • Request22 38 2A
  • Service 22DID 382A
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 15 of the reply, 16 bits. The bytes are in little-endian order.

0x0DDA = 3546 → (3546 ÷ 10) = 354.6 mA

Formula
(val ÷ 10)
Range
0 to 6553.5 mA
Unit
mA

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Upper adapted coupling point clutch 1 from microslip adaptation Q3_MQB_DQ250_UPPER_ADAPTED_COUPLING_POINT_CLUTCH_1_FROM_MICROSLIP_ADAPTConfirmed

  • Request22 38 8F
  • Service 22DID 388F
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 7 of the reply, 8 bits.

0xA8 = 168 → (168 ÷ 200) = 0.84 A

Formula
(val ÷ 200)
Range
0 to 1.275 A
Unit
A

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Upper adapted coupling point clutch 2 from microslip adaptation Q3_MQB_DQ250_UPPER_ADAPTED_COUPLING_POINT_CLUTCH_2_FROM_MICROSLIP_ADAPTConfirmed

  • Request22 38 90
  • Service 22DID 3890
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2019, 2021 to 2026

Example reply from a 2020 Audi Q3.

Bits 0 to 7 of the reply, 8 bits.

0x9C = 156 → (156 ÷ 200) = 0.78 A

Formula
(val ÷ 200)
Range
0 to 1.275 A
Unit
A

Confirmed for 2020. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018 to 2019, 2021, 2023, 2025.

Working hours Q3_PQ35_WORKING_HOURSConfirmed

  • Request22 11 10
  • Service 22DID 1110
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2011 to 2018, 2020 to 2026

Example reply from a 2019 Audi Q3.

Bits 0 to 31 of the reply, 32 bits. The bytes are in little-endian order.

0x0DFA2704 = 234497796 → (234497796 × 2 ÷ 360000) = 1,302.765533

Formula
(val × 2 ÷ 360000)
Range
0 to 23860.92942
Unit
Raw value

Confirmed for 2019. In testing for 2011 to 2012, 2014 to 2017, 2022, 2024, 2026. Not supported for 2013, 2018, 2020 to 2021, 2023, 2025.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.