Engine parameters

The Audi A1 has 52 engine parameters.

● Confirmed◆ In testing○ Supported× Not supported

Absolute evap system vapor pressure `EVAP_VPA`SAE J1979Confirmed

Normally obtained from a sensor located in the fuel tank or a sensor in an evaporative system vapor line.

Request01 53
Service 01PID 53
Module7E0 → 7E8
Every1 s

Bits 0 to 15 of the reply, 16 bits.

Formula: (val ÷ 200)
Range: 0 to 327.675 kPa
Unit: kPa

Confirmed for 2022.

Absolute load value `LOAD_ABS`SAE J1979Confirmed

Request01 43
Service 01PID 43
Module7E0 → 7E8
Every250 ms

Bits 0 to 15 of the reply, 16 bits.

Formula: (val × 100 ÷ 255)
Range: 0 to 25700 %
Unit: %

Confirmed for 2022. Supported for 2011, 2015, 2019 to 2020, 2023 to 2025.

Actual engine torque `TQ_ACT`SAE J1979Confirmed

Request01 62
Service 01PID 62
Module7E0 → 7E8
Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula: (val − 125)
Range: -125 to 130 %
Unit: %

Confirmed for 2022.

Barometric pressure `BARO`SAE J1979Confirmed

Normally obtained from one of a dedicated barometric sensor, a MAP sensor at key-on and during certain modes of driving, or inferred from a MAF sensor and other inputs during certain modes of driving. The control module reports BARO from whatever source it is derived from.

Request01 33
Service 01PID 33
Module7E0 → 7E8
Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula: val
Range: 0 to 255 kPa
Unit: kPa

Confirmed for 2022. Supported for 2011, 2014 to 2015, 2019 to 2020, 2023 to 2025.

Boost pressure sensor A `BP_A_ACT`SAE J1979Confirmed

Actual turbocharger/supercharger A boost pressure.

Request01 70
Service 01PID 70
Module7E0 → 7E8
Every250 ms

Bits 24 to 39 of the reply, 16 bits.

Formula: (val ÷ 32)
Range: 0 to 2047.96875 kPa
Unit: kPa

Confirmed for 2022.

Boost pressure sensor B `BP_B_ACT`SAE J1979Confirmed

Actual turbocharger/supercharger B boost pressure.

Request01 70
Service 01PID 70
Module7E0 → 7E8
Every250 ms

Bits 56 to 71 of the reply, 16 bits.

Formula: (val ÷ 32)
Range: 0 to 2047.96875 kPa
Unit: kPa

Confirmed for 2022.

Calculated engine load `LOAD_PCT`SAE J1979Confirmed

Represents the amount of work the engine is doing. Expected to reach 100% at wide open throttle/wide open pedal at any altitude, temperature or rpm for both naturally aspirated and boosted engines. If engine load is limited for powertrain protection e.g. engine/turbocharger protection, this value may not reach 100%. For hybrid vehicles, indicates the torque produced only by the internal combustion engine, not the torque being delivered by the entire powertrain. For electric vehicles, the meaning of this parameter is undefined.

Pelican can show this parameter as the engine load.

Request01 04
Service 01PID 04
Module7E0 → 7E8
Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula: (val × 100 ÷ 255)
Range: 0 to 100 %
Unit: %

Confirmed for 2015, 2020, 2022. Supported for 2011, 2014, 2019, 2023 to 2025.

Catalyst temperature bank 1, sensor 1 `CATEMP11`SAE J1979Confirmed

Request01 3C
Service 01PID 3C
Module7E0 → 7E8
Every250 ms

Bits 0 to 15 of the reply, 16 bits.

Formula: (val ÷ 10 − 40)
Range: -40 to 6513.5 °C
Unit: °C

Confirmed for 2022. Supported for 2011, 2015, 2019 to 2020, 2023 to 2025.

Commanded boost pressure A `BP_A_CMD`SAE J1979Confirmed

Turbocharger/supercharger A commanded boost pressure.

Request01 70
Service 01PID 70
Module7E0 → 7E8
Every250 ms

Bits 8 to 23 of the reply, 16 bits.

Formula: (val ÷ 32)
Range: 0 to 2047.96875 kPa
Unit: kPa

Confirmed for 2022.

Commanded boost pressure B `BP_B_CMD`SAE J1979Confirmed

Turbocharger/supercharger B commanded boost pressure.

Request01 70
Service 01PID 70
Module7E0 → 7E8
Every250 ms

Bits 40 to 55 of the reply, 16 bits.

Formula: (val ÷ 32)
Range: 0 to 2047.96875 kPa
Unit: kPa

Confirmed for 2022.

Commanded equivalence ratio `EQ_RAT`SAE J1979Confirmed

Fuel systems that utilize conventional oxygen sensor display the inverse of the commanded open loop equivalence ratio (also known as lambda) while the fuel control system is in open loop. Will indicate 1.000 while in closed-loop fuel.

Pelican can show this parameter as the commanded lambda.

Request01 44
Service 01PID 44
Module7E0 → 7E8
Every250 ms

Bits 0 to 15 of the reply, 16 bits.

Formula: (val × 2 ÷ 65535)
Range: 0 to 1.99
Unit: Number

Confirmed for 2015, 2020, 2022. Supported for 2011, 2019, 2023 to 2025.

Commanded evaporative purge `EVAP_PCT`SAE J1979Confirmed

Request01 2E
Service 01PID 2E
Module7E0 → 7E8
Every1 s

Bits 0 to 7 of the reply, 8 bits.

Formula: (val × 100 ÷ 255)
Range: 0 to 100 %
Unit: %

Confirmed for 2022. Supported for 2011, 2015, 2019 to 2020, 2023 to 2025.

Commanded throttle actuator control `TAC_PCT`SAE J1979Confirmed

Request01 4C
Service 01PID 4C
Module7E0 → 7E8
Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula: (val × 100 ÷ 255)
Range: 0 to 100 %
Unit: %

Confirmed for 2022. Supported for 2011, 2014.

Commanded wastegate A position `WG_A_CMD`SAE J1979Confirmed

If an on/off solenoid is used, is 0% when the wastegate is commanded off (allow full boost), 100% when commanded on (dump boost). If a vacuum solenoid is duty cycled, the duty cycle from 0 to 100% is displayed. If a linear or stepper motor valve is used, the fully closed position (full boost) is displayed as 0%, the fully open position (dump boost) is displayed as 100%. Intermediate positions are displayed as a percent of the full-open position. Any other actuation method is normalized to display 0% when the WG is commanded off and 100% when the WG is commanded on.

Request01 72
Service 01PID 72
Module7E0 → 7E8
Every250 ms

Bits 8 to 15 of the reply, 8 bits.

Formula: (val × 100 ÷ 255)
Range: 0 to 100 %
Unit: %

Confirmed for 2022.

Commanded wastegate B position `WG_B_CMD`SAE J1979Confirmed

Request01 72
Service 01PID 72
Module7E0 → 7E8
Every250 ms

Bits 24 to 31 of the reply, 8 bits.

Formula: (val × 100 ÷ 255)
Range: 0 to 100 %
Unit: %

Confirmed for 2022.

Engine coolant temperature `ECT`SAE J1979Confirmed

Your engine temperature must operate within a certain temperature range to operate efficiently and safely. If it runs too hot, then your engine could be permanently damaged. If it runs too cold, then your engine will use more fuel than necessary.

Pelican can show this parameter as the engine coolant temperature.

Request01 05
Service 01PID 05
Module7E0 → 7E8
Every500 ms

Bits 0 to 7 of the reply, 8 bits.

Formula: (val − 40)
Range: -40 to 215 °C
Unit: °C

Confirmed for 2015, 2020, 2022. Supported for 2011, 2014, 2019, 2023 to 2025.

Engine coolant temperature 1 `ECT_1`SAE J1979Confirmed

Request01 67
Service 01PID 67
Module7E0 → 7E8
Every1 s

Bits 8 to 15 of the reply, 8 bits.

Formula: (val − 40)
Range: -40 to 215 °C
Unit: °C

Confirmed for 2022.

Engine coolant temperature 2 `ECT_2`SAE J1979Confirmed

Request01 67
Service 01PID 67
Module7E0 → 7E8
Every1 s

Bits 16 to 23 of the reply, 8 bits.

Formula: (val − 40)
Range: -40 to 215 °C
Unit: °C

Confirmed for 2022.

Engine Friction - Percent Torque `TQ_FR`SAE J1979Confirmed

Request01 8E
Service 01PID 8E
Module7E0 → 7E8
Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula: (val − 125)
Range: -125 to 130 %
Unit: %

Confirmed for 2022.

Engine reference torque `TQ_REF`SAE J1979Confirmed

Request01 63
Service 01PID 63
Module7E0 → 7E8
Every86400 s

Bits 0 to 15 of the reply, 16 bits.

Formula: val
Range: 0 to 65535 N·m
Unit: N·m

Confirmed for 2022.

Engine RPM `RPM`SAE J1979Confirmed

Request01 0C
Service 01PID 0C
Module7E0 → 7E8
Every250 ms

Bits 0 to 15 of the reply, 16 bits.

Formula: (val ÷ 4)
Range: 0 to 16383.75 rpm
Unit: rpm

Confirmed for 2022. Supported for 2011, 2014 to 2015, 2019 to 2020, 2023 to 2025.

Intake air temperature `IAT`SAE J1979Confirmed

Request01 0F
Service 01PID 0F
Module7E0 → 7E8
Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula: (val − 40)
Range: -40 to 215 °C
Unit: °C

Confirmed for 2022. Supported for 2011, 2014 to 2015, 2019 to 2020, 2023 to 2025.

Intake air temperature, bank 1, sensor 1 `IAT_11`SAE J1979Confirmed

Request01 68
Service 01PID 68
Module7E0 → 7E8
Every250 ms

Bits 8 to 15 of the reply, 8 bits.

Formula: (val − 40)
Range: -40 to 215 °C
Unit: °C

Confirmed for 2022.

Intake air temperature, bank 1, sensor 2 `IAT_12`SAE J1979Confirmed

Request01 68
Service 01PID 68
Module7E0 → 7E8
Every250 ms

Bits 16 to 23 of the reply, 8 bits.

Formula: (val − 40)
Range: -40 to 215 °C
Unit: °C

Confirmed for 2022.

Intake manifold absolute pressure `MAP`SAE J1979Confirmed

Request01 0B
Service 01PID 0B
Module7E0 → 7E8
Every1 s

Bits 0 to 7 of the reply, 8 bits.

Formula: val
Range: 0 to 255 kPa
Unit: kPa

Confirmed for 2022. Supported for 2011, 2014 to 2015, 2019 to 2020, 2023 to 2025.

Long term fuel trim (bank 1) `LONGFT1`SAE J1979Confirmed

Request01 07
Service 01PID 07
Module7E0 → 7E8
Every1 s

Bits 0 to 7 of the reply, 8 bits.

Formula: (val × 100 ÷ 128 − 100)
Range: -100 to 99.2 %
Unit: %

Confirmed for 2022. Supported for 2011, 2015, 2019 to 2020, 2023 to 2025.

Long term secondary O2 sensor fuel trim (bank 1) `LGSO2FT1`SAE J1979Confirmed

Request01 56
Service 01PID 56
Module7E0 → 7E8
Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula: (val × 100 ÷ 128 − 100)
Range: -100 to 99.22 %
Unit: %

Confirmed for 2022.

Short term fuel trim (bank 1) `SHRTFT1`SAE J1979Confirmed

Correction being used by the closed-loop fuel algorithm.

Pelican can show this parameter as the short term fuel trim.

Request01 06
Service 01PID 06
Module7E0 → 7E8
Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula: (val × 100 ÷ 128 − 100)
Range: -100 to 99.2 %
Unit: %

Confirmed for 2015, 2020, 2022. Supported for 2011, 2019, 2023 to 2025.

Timing advance `SPARKADV`SAE J1979Confirmed

Ignition timing spark advance for the first cylinder. Measured in degrees before dead center. Minus is degrees before dead center, positive is degrees after.

Request01 0E
Service 01PID 0E
Module7E0 → 7E8
Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula: (val ÷ 2 − 64)
Range: -64 to 63.5 °
Unit: °

Confirmed for 2022. Supported for 2011, 2015, 2019 to 2020, 2023 to 2025.

Type of fuel currently being used by the vehicle `FUEL_TYP`SAE J1979Confirmed

Request01 51
Service 01PID 51
Module7E0 → 7E8
Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Unit: Named states

States
Raw value	State	Meaning
`1`	`GAS`	Gasoline/petrol
`2`	`METH`	Methanol
`3`	`ETH`	Ethanol
`4`	`DSL`	Diesel
`5`	`LPG`	Liquefied petroleum gas
`6`	`CNG`	Compressed natural gas
`7`	`PROP`	Propane
`8`	`ELEC`	Battery/electric
`9`	`BI_GAS`	Bi-fuel vehicle using gasoline/petrol
`10`	`BI_METH`	Bi-fuel vehicle using methanol
`11`	`BI_ETH`	Bi-fuel vehicle using ethanol
`12`	`BI_LPG`	Bi-fuel vehicle using LPG
`13`	`BI_CNG`	Bi-fuel vehicle using CNG
`14`	`BI_PROP`	Bi-fuel vehicle using propane
`15`	`BI_ELEC`	Bi-fuel vehicle using battery
`16`	`BI_MIX`	Bi-fuel vehicle using battery and combustion engine for propulsion
`17`	`HYB_GAS`	Hybrid vehicle using gasoline engine for propulsion
`18`	`HYB_ETH`	Hybrid vehicle using gasoline engine on ethanol for propulsion
`19`	`HYB_DSL`	Hybrid vehicle using diesel engine for propulsion
`20`	`HYB_ELEC`	Hybrid vehicle using battery for propulsion
`21`	`HYB_MIX`	Hybrid vehicle using battery and combustion engine for propulsion
`22`	`HYB_REG`	Hybrid vehicle in regeneration mode
`23`	`BI_DSL`	Bi-fuel vehicle using diesel
`24`	`BI_NG`	Bi-fuel vehicle using natural gas
`25`	`BI_DSL`	Bi-fuel vehicle using diesel
`26`	`NG`	Natural gas
`27`	`DSL_CNG`	Dual fuel vehicle using diesel and CNG
`28`	`DSL_LNG`	Dual fuel vehicle using diesel and LNG
`29`	`FC_H2`	Fuel cell utilizing hydrogen
`30`	`HICE_HHO`	Hydrogen Internal Combustion Engine
`31`	`KERO`	Kerosene
`32`	`HFO`	Heavy Fuel Oil

Confirmed for 2022.

Wastegate A position `WG_A_ACT`SAE J1979Confirmed

Request01 72
Service 01PID 72
Module7E0 → 7E8
Every250 ms

Bits 16 to 23 of the reply, 8 bits.

Formula: (val × 100 ÷ 255)
Range: 0 to 100 %
Unit: %

Confirmed for 2022.

Wastegate B position `WG_B_ACT`SAE J1979Confirmed

Request01 72
Service 01PID 72
Module7E0 → 7E8
Every250 ms

Bits 32 to 39 of the reply, 8 bits.

Formula: (val × 100 ÷ 255)
Range: 0 to 100 %
Unit: %

Confirmed for 2022.

Engine › Internal

Boost pressure A control status supported `BP_A_SUP`SAE J1979Confirmed

Request01 70
Service 01PID 70
Module7E0 → 7E8
Every250 ms

Bit 5 of the reply.

Formula: val
Range: 0 to 1
Unit: No or yes

Confirmed for 2022.

Boost pressure A supported `BP_A_ACT_SUP`SAE J1979Confirmed

Request01 70
Service 01PID 70
Module7E0 → 7E8
Every250 ms

Bit 6 of the reply.

Formula: val
Range: 0 to 1
Unit: No or yes

Confirmed for 2022.

Boost pressure B control status supported `BP_B_SUP`SAE J1979Confirmed

Request01 70
Service 01PID 70
Module7E0 → 7E8
Every250 ms

Bit 2 of the reply.

Formula: val
Range: 0 to 1
Unit: No or yes

Confirmed for 2022.

Boost pressure B supported `BP_B_ACT_SUP`SAE J1979Confirmed

Request01 70
Service 01PID 70
Module7E0 → 7E8
Every250 ms

Bit 3 of the reply.

Formula: val
Range: 0 to 1
Unit: No or yes

Confirmed for 2022.

Commanded boost pressure A supported `BP_A_CMD_SUP`SAE J1979Confirmed

Request01 70
Service 01PID 70
Module7E0 → 7E8
Every250 ms

Bit 7 of the reply.

Formula: val
Range: 0 to 1
Unit: No or yes

Confirmed for 2022.

Commanded boost pressure B supported `BP_B_CMD_SUP`SAE J1979Confirmed

Request01 70
Service 01PID 70
Module7E0 → 7E8
Every250 ms

Bit 4 of the reply.

Formula: val
Range: 0 to 1
Unit: No or yes

Confirmed for 2022.

Commanded wastegate A position supported `WG_A_CMD_SUP`SAE J1979Confirmed

Request01 72
Service 01PID 72
Module7E0 → 7E8
Every250 ms

Bit 7 of the reply.

Formula: val
Range: 0 to 1
Unit: No or yes

Confirmed for 2022.

Commanded wastegate B position supported `WG_B_CMD_SUP`SAE J1979Confirmed

Request01 72
Service 01PID 72
Module7E0 → 7E8
Every250 ms

Bit 5 of the reply.

Formula: val
Range: 0 to 1
Unit: No or yes

Confirmed for 2022.

IAT Bank 1, Sensor 1 supported `IAT_11_SUP`SAE J1979Confirmed

Request01 68
Service 01PID 68
Module7E0 → 7E8
Every250 ms

Bit 7 of the reply.

Formula: val
Range: 0 to 1
Unit: No or yes

Confirmed for 2022.

IAT Bank 1, Sensor 1 supported `IAT_21_SUP`SAE J1979Confirmed

Request01 68
Service 01PID 68
Module7E0 → 7E8
Every250 ms

Bit 4 of the reply.

Formula: val
Range: 0 to 1
Unit: No or yes

Confirmed for 2022.

IAT Bank 1, Sensor 2 supported `IAT_12_SUP`SAE J1979Confirmed

Request01 68
Service 01PID 68
Module7E0 → 7E8
Every250 ms

Bit 6 of the reply.

Formula: val
Range: 0 to 1
Unit: No or yes

Confirmed for 2022.

IAT Bank 1, Sensor 3 supported `IAT_13_SUP`SAE J1979Confirmed

Request01 68
Service 01PID 68
Module7E0 → 7E8
Every250 ms

Bit 5 of the reply.

Formula: val
Range: 0 to 1
Unit: No or yes

Confirmed for 2022.

IAT Bank 2, Sensor 2 supported `IAT_22_SUP`SAE J1979Confirmed

Request01 68
Service 01PID 68
Module7E0 → 7E8
Every250 ms

Bit 3 of the reply.

Formula: val
Range: 0 to 1
Unit: No or yes

Confirmed for 2022.

IAT Bank 2, Sensor 3 supported `IAT_23_SUP`SAE J1979Confirmed

Request01 68
Service 01PID 68
Module7E0 → 7E8
Every250 ms

Bit 2 of the reply.

Formula: val
Range: 0 to 1
Unit: No or yes

Confirmed for 2022.

Is ECT sensor 1 supported? `ECT_1_SUP`SAE J1979Confirmed

Request01 67
Service 01PID 67
Module7E0 → 7E8
Every1 s

Bit 7 of the reply.

Formula: val
Range: 0 to 1
Unit: Number

Confirmed for 2022.

Is ECT sensor 2 supported? `ECT_2_SUP`SAE J1979Confirmed

Request01 67
Service 01PID 67
Module7E0 → 7E8
Every1 s

Bit 6 of the reply.

Formula: val
Range: 0 to 1
Unit: Number

Confirmed for 2022.

Wastegate A position supported `WG_A_ACT_SUP`SAE J1979Confirmed

Request01 72
Service 01PID 72
Module7E0 → 7E8
Every250 ms

Bit 6 of the reply.

Formula: val
Range: 0 to 1
Unit: No or yes

Confirmed for 2022.

Wastegate B position supported `WG_B_ACT_SUP`SAE J1979Confirmed

Request01 72
Service 01PID 72
Module7E0 → 7E8
Every250 ms

Bit 4 of the reply.

Formula: val
Range: 0 to 1
Unit: No or yes

Confirmed for 2022.

Engine › OxygenSensors

Lambda value, Equivalence Ratio Bank 1, Sensor 1 `LAMBDA11_CURRENT`SAE J1979Confirmed

Pelican can show this parameter as the O2 lambda.

Request01 34
Service 01PID 34
Module7E0 → 7E8
Every250 ms

Bits 0 to 15 of the reply, 16 bits.

Formula: (val ÷ 32768)
Range: 0 to 1.99
Unit: Number

Confirmed for 2020. Supported for 2011, 2022 to 2023.

Wide Range O2S Current, O2 Sensor Bank 1, Sensor 1 `O2S11_CURRENT`SAE J1979Confirmed

Request01 34
Service 01PID 34
Module7E0 → 7E8
Every250 ms

Bits 16 to 31 of the reply, 16 bits.

Formula: (val ÷ 256 − 128)
Range: -128 to 127.996 mA
Unit: mA

Confirmed for 2020. Supported for 2011, 2022 to 2023.

Engine parameters

Absolute evap system vapor pressure EVAP_VPASAE J1979Confirmed

Absolute load value LOAD_ABSSAE J1979Confirmed

Actual engine torque TQ_ACTSAE J1979Confirmed

Barometric pressure BAROSAE J1979Confirmed

Boost pressure sensor A BP_A_ACTSAE J1979Confirmed

Boost pressure sensor B BP_B_ACTSAE J1979Confirmed

Calculated engine load LOAD_PCTSAE J1979Confirmed

Catalyst temperature bank 1, sensor 1 CATEMP11SAE J1979Confirmed

Commanded boost pressure A BP_A_CMDSAE J1979Confirmed

Commanded boost pressure B BP_B_CMDSAE J1979Confirmed

Commanded equivalence ratio EQ_RATSAE J1979Confirmed

Commanded evaporative purge EVAP_PCTSAE J1979Confirmed

Commanded throttle actuator control TAC_PCTSAE J1979Confirmed

Commanded wastegate A position WG_A_CMDSAE J1979Confirmed

Commanded wastegate B position WG_B_CMDSAE J1979Confirmed

Engine coolant temperature ECTSAE J1979Confirmed

Engine coolant temperature 1 ECT_1SAE J1979Confirmed

Engine coolant temperature 2 ECT_2SAE J1979Confirmed

Engine Friction - Percent Torque TQ_FRSAE J1979Confirmed

Engine reference torque TQ_REFSAE J1979Confirmed

Engine RPM RPMSAE J1979Confirmed

Intake air temperature IATSAE J1979Confirmed

Intake air temperature, bank 1, sensor 1 IAT_11SAE J1979Confirmed

Intake air temperature, bank 1, sensor 2 IAT_12SAE J1979Confirmed

Intake manifold absolute pressure MAPSAE J1979Confirmed

Long term fuel trim (bank 1) LONGFT1SAE J1979Confirmed

Long term secondary O2 sensor fuel trim (bank 1) LGSO2FT1SAE J1979Confirmed

Short term fuel trim (bank 1) SHRTFT1SAE J1979Confirmed

Timing advance SPARKADVSAE J1979Confirmed

Type of fuel currently being used by the vehicle FUEL_TYPSAE J1979Confirmed

Wastegate A position WG_A_ACTSAE J1979Confirmed

Wastegate B position WG_B_ACTSAE J1979Confirmed

Engine › Internal

Boost pressure A control status supported BP_A_SUPSAE J1979Confirmed

Boost pressure A supported BP_A_ACT_SUPSAE J1979Confirmed

Boost pressure B control status supported BP_B_SUPSAE J1979Confirmed

Boost pressure B supported BP_B_ACT_SUPSAE J1979Confirmed

Commanded boost pressure A supported BP_A_CMD_SUPSAE J1979Confirmed

Commanded boost pressure B supported BP_B_CMD_SUPSAE J1979Confirmed

Commanded wastegate A position supported WG_A_CMD_SUPSAE J1979Confirmed

Commanded wastegate B position supported WG_B_CMD_SUPSAE J1979Confirmed

IAT Bank 1, Sensor 1 supported IAT_11_SUPSAE J1979Confirmed

IAT Bank 1, Sensor 1 supported IAT_21_SUPSAE J1979Confirmed

IAT Bank 1, Sensor 2 supported IAT_12_SUPSAE J1979Confirmed

IAT Bank 1, Sensor 3 supported IAT_13_SUPSAE J1979Confirmed

IAT Bank 2, Sensor 2 supported IAT_22_SUPSAE J1979Confirmed

IAT Bank 2, Sensor 3 supported IAT_23_SUPSAE J1979Confirmed

Is ECT sensor 1 supported? ECT_1_SUPSAE J1979Confirmed

Is ECT sensor 2 supported? ECT_2_SUPSAE J1979Confirmed

Wastegate A position supported WG_A_ACT_SUPSAE J1979Confirmed

Wastegate B position supported WG_B_ACT_SUPSAE J1979Confirmed

Engine › OxygenSensors

Lambda value, Equivalence Ratio Bank 1, Sensor 1 LAMBDA11_CURRENTSAE J1979Confirmed

Wide Range O2S Current, O2 Sensor Bank 1, Sensor 1 O2S11_CURRENTSAE J1979Confirmed

Start your test drive today.

Absolute evap system vapor pressure `EVAP_VPA`SAE J1979Confirmed

Absolute load value `LOAD_ABS`SAE J1979Confirmed

Actual engine torque `TQ_ACT`SAE J1979Confirmed

Barometric pressure `BARO`SAE J1979Confirmed

Boost pressure sensor A `BP_A_ACT`SAE J1979Confirmed

Boost pressure sensor B `BP_B_ACT`SAE J1979Confirmed

Calculated engine load `LOAD_PCT`SAE J1979Confirmed

Catalyst temperature bank 1, sensor 1 `CATEMP11`SAE J1979Confirmed

Commanded boost pressure A `BP_A_CMD`SAE J1979Confirmed

Commanded boost pressure B `BP_B_CMD`SAE J1979Confirmed

Commanded equivalence ratio `EQ_RAT`SAE J1979Confirmed

Commanded evaporative purge `EVAP_PCT`SAE J1979Confirmed

Commanded throttle actuator control `TAC_PCT`SAE J1979Confirmed

Commanded wastegate A position `WG_A_CMD`SAE J1979Confirmed

Commanded wastegate B position `WG_B_CMD`SAE J1979Confirmed

Engine coolant temperature `ECT`SAE J1979Confirmed

Engine coolant temperature 1 `ECT_1`SAE J1979Confirmed

Engine coolant temperature 2 `ECT_2`SAE J1979Confirmed

Engine Friction - Percent Torque `TQ_FR`SAE J1979Confirmed

Engine reference torque `TQ_REF`SAE J1979Confirmed

Engine RPM `RPM`SAE J1979Confirmed

Intake air temperature `IAT`SAE J1979Confirmed

Intake air temperature, bank 1, sensor 1 `IAT_11`SAE J1979Confirmed

Intake air temperature, bank 1, sensor 2 `IAT_12`SAE J1979Confirmed

Intake manifold absolute pressure `MAP`SAE J1979Confirmed

Long term fuel trim (bank 1) `LONGFT1`SAE J1979Confirmed

Long term secondary O2 sensor fuel trim (bank 1) `LGSO2FT1`SAE J1979Confirmed

Short term fuel trim (bank 1) `SHRTFT1`SAE J1979Confirmed

Timing advance `SPARKADV`SAE J1979Confirmed

Type of fuel currently being used by the vehicle `FUEL_TYP`SAE J1979Confirmed

Wastegate A position `WG_A_ACT`SAE J1979Confirmed

Wastegate B position `WG_B_ACT`SAE J1979Confirmed

Boost pressure A control status supported `BP_A_SUP`SAE J1979Confirmed

Boost pressure A supported `BP_A_ACT_SUP`SAE J1979Confirmed

Boost pressure B control status supported `BP_B_SUP`SAE J1979Confirmed

Boost pressure B supported `BP_B_ACT_SUP`SAE J1979Confirmed

Commanded boost pressure A supported `BP_A_CMD_SUP`SAE J1979Confirmed

Commanded boost pressure B supported `BP_B_CMD_SUP`SAE J1979Confirmed

Commanded wastegate A position supported `WG_A_CMD_SUP`SAE J1979Confirmed

Commanded wastegate B position supported `WG_B_CMD_SUP`SAE J1979Confirmed

IAT Bank 1, Sensor 1 supported `IAT_11_SUP`SAE J1979Confirmed

IAT Bank 1, Sensor 1 supported `IAT_21_SUP`SAE J1979Confirmed

IAT Bank 1, Sensor 2 supported `IAT_12_SUP`SAE J1979Confirmed

IAT Bank 1, Sensor 3 supported `IAT_13_SUP`SAE J1979Confirmed

IAT Bank 2, Sensor 2 supported `IAT_22_SUP`SAE J1979Confirmed

IAT Bank 2, Sensor 3 supported `IAT_23_SUP`SAE J1979Confirmed

Is ECT sensor 1 supported? `ECT_1_SUP`SAE J1979Confirmed

Is ECT sensor 2 supported? `ECT_2_SUP`SAE J1979Confirmed

Wastegate A position supported `WG_A_ACT_SUP`SAE J1979Confirmed

Wastegate B position supported `WG_B_ACT_SUP`SAE J1979Confirmed

Lambda value, Equivalence Ratio Bank 1, Sensor 1 `LAMBDA11_CURRENT`SAE J1979Confirmed

Wide Range O2S Current, O2 Sensor Bank 1, Sensor 1 `O2S11_CURRENT`SAE J1979Confirmed