Pelican
Get the app

Acura Integra

Electrical parameters

The Acura Integra has 2 electrical parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Brake pressure INTEGRA_BRK_P

  • Request22 40 05
  • Service 22DID 4005
  • ModuleDA28 → 28
  • Every250 ms
  • Testing

Bits 56 to 71 of the reply, 16 bits.

Formula
(val − 25)
Range
0 to 120 bar
Unit
bar

In testing for 1988 to 2006, 2023 to 2026.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Brake pressure INTEGRA_BRK_P

  • Request22 40 05
  • Service 22DID 4005
  • ModuleDA28 → 28
  • Every250 ms
  • Testing

Bits 56 to 71 of the reply, 16 bits.

Formula
(val − 25)
Range
0 to 120 bar
Unit
bar

In testing for 1988 to 2006, 2023 to 2026.

Brake switch INTEGRA_BRK_SW

  • Request22 40 04
  • Service 22DID 4004
  • ModuleDA28 → 28
  • Every250 ms
  • Testing

Bit 127 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 1988 to 2006, 2023 to 2026.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.