Acura Integra

Climate parameters

The Acura Integra has 3 climate parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

A/C clutch INTEGRA_AC_CLUTCHConfirmed

  • Request22 26 10
  • Service 22DID 2610
  • ModuleDA10 → 10
  • Every5 s
  • Testing for 1988 to 2006

Bit 262 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2023 to 2026. In testing for 1988 to 2006.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

A/C clutch INTEGRA_AC_CLUTCHConfirmed

  • Request22 26 10
  • Service 22DID 2610
  • ModuleDA10 → 10
  • Every5 s
  • Testing for 1988 to 2006

Bit 262 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2023 to 2026. In testing for 1988 to 2006.

Ambient air temperature AATSAE J1979Confirmed

  • Request01 46
  • Service 01PID 46
  • Module7E0 → 7E8
  • Every15 s

Bits 0 to 7 of the reply, 8 bits.

Formula
(val − 40)
Range
-40 to 215 °C
Unit
°C

Confirmed for 2024 to 2025. Supported for 2026.

Outside air temperature INTEGRA_AATConfirmed

  • Request22 70 28
  • Service 22DID 7028
  • ModuleDA60 → 60
  • Every5 s
  • Testing for 1988 to 2006

Bits 132 to 143 of the reply, 12 bits. The value is signed.

Formula
val
Range
-40 to 2047 °F
Unit
°F

Confirmed for 2023 to 2026. In testing for 1988 to 2006.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.