Volkswagen Beetle

Clock parameters

The Volkswagen Beetle has 1 clock parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Time since engine start VOLKSWAGEN_RUNTMConfirmed

How long it's been since the engine started.

  • Request22 F4 1F
  • Service 22DID F41F
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Example reply from a 2014 Volkswagen Beetle.

Bits 0 to 15 of the reply, 16 bits.

0x01E2 = 482 → 482 s

Formula
val
Range
0 to 65535 s
Unit
s

Confirmed for 2014. In testing for 1988 to 2013, 2015 to 2019.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Time since engine start VOLKSWAGEN_RUNTMConfirmed

How long it's been since the engine started.

  • Request22 F4 1F
  • Service 22DID F41F
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Example reply from a 2014 Volkswagen Beetle.

Bits 0 to 15 of the reply, 16 bits.

0x01E2 = 482 → 482 s

Formula
val
Range
0 to 65535 s
Unit
s

Confirmed for 2014. In testing for 1988 to 2013, 2015 to 2019.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.