Toyota IstStat parametersThe Toyota Ist has 1 stat parameter.● Confirmed◆ In testing○ Supported× Not supportedHow to read parameter cardsHow to read a parameter cardReady-on time, total TOYOTA_READY_HOURSRequest22 15 E8Service 22DID 15E8Module7D2 → 7DAEvery60 sTestingBits 80 to 95 of the reply, 16 bits.FormulavalRange0 to 65535 hUnithIn testing for 2002 to 2016.The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.Where the parameter is in the response, and how Pelican converts the raw value into a value.A real reply, decoded. The raw value comes first, then the reading.Which model years have tested this parameter.Ready-on time, total TOYOTA_READY_HOURSRequest22 15 E8Service 22DID 15E8Module7D2 → 7DAEvery60 sTestingBits 80 to 95 of the reply, 16 bits.FormulavalRange0 to 65535 hUnithIn testing for 2002 to 2016.
