Pelican
Get the app

Subaru Outback

Movement parameters

The Subaru Outback has 10 movement parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Main accelerator sensor OUTBACK_MAIN_ACCEL_SENSConfirmed

  • Request22 12 79
  • Service 22DID 1279
  • Module7E0 → 7E8
  • Every250 ms
  • Testing for 1994 to 2012, 2014 to 2017, 2020, 2022 to 2026

Example reply from a 2021 Subaru Outback.

Bits 0 to 7 of the reply, 8 bits.

0x22 = 34 → (34 ÷ 50) = 0.68 V

Formula
(val ÷ 50)
Range
0 to 5.1 V
Unit
V

Confirmed for 2013, 2018 to 2019, 2021. In testing for 1994 to 2012, 2014 to 2017, 2020, 2022. Not supported for 2023 to 2026.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Front wheel speed OUTBACK_FRONT_WHEEL_SPEEDConfirmed

  • Request22 11 47
  • Service 22DID 1147
  • Module7A3 → 7AB
  • Every1 s
  • Testing for 1994 to 2021

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535 rpm
Unit
rpm

Confirmed for 2022 to 2026. In testing for 1994 to 2010, 2012, 2014. Not supported for 2011, 2013, 2015 to 2021.

Main accelerator sensor OUTBACK_MAIN_ACCEL_SENSConfirmed

  • Request22 12 79
  • Service 22DID 1279
  • Module7E0 → 7E8
  • Every250 ms
  • Testing for 1994 to 2012, 2014 to 2017, 2020, 2022 to 2026

Example reply from a 2021 Subaru Outback.

Bits 0 to 7 of the reply, 8 bits.

0x22 = 34 → (34 ÷ 50) = 0.68 V

Formula
(val ÷ 50)
Range
0 to 5.1 V
Unit
V

Confirmed for 2013, 2018 to 2019, 2021. In testing for 1994 to 2012, 2014 to 2017, 2020, 2022. Not supported for 2023 to 2026.

Primary pulley speed OUTBACK_PRIMARY_PULLEY_SPEEDConfirmed

  • Request22 11 46
  • Service 22DID 1146
  • Module7A3 → 7AB
  • Every1 s
  • Testing for 1994 to 2021

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535 rpm
Unit
rpm

Confirmed for 2022 to 2026. In testing for 1994 to 2010, 2012, 2014. Not supported for 2011, 2013, 2015 to 2021.

Secondary pulley speed OUTBACK_SECONDARY_PULLEY_SPEEDConfirmed

  • Request22 11 38
  • Service 22DID 1138
  • Module7A3 → 7AB
  • Every1 s
  • Testing for 1994 to 2021

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535 rpm
Unit
rpm

Confirmed for 2022 to 2026. In testing for 1994 to 2010, 2012, 2014. Not supported for 2011, 2013, 2015 to 2021.

Sub accelerator sensor OUTBACK_SUB_ACCEL_SENSConfirmed

  • Request22 12 78
  • Service 22DID 1278
  • Module7E0 → 7E8
  • Every250 ms
  • Testing for 1994 to 2012, 2014 to 2017, 2020, 2022 to 2026

Example reply from a 2021 Subaru Outback.

Bits 0 to 7 of the reply, 8 bits.

0x22 = 34 → (34 ÷ 50) = 0.68 V

Formula
(val ÷ 50)
Range
0 to 5.1 V
Unit
V

Confirmed for 2013, 2018 to 2019, 2021. In testing for 1994 to 2012, 2014 to 2017, 2020, 2022. Not supported for 2023 to 2026.

Target engine speed OUTBACK_TARGET_ENGINE_SPEEDConfirmed

  • Request22 11 21
  • Service 22DID 1121
  • Module7A2 → 7AA
  • Every1 s
  • Testing for 1994 to 2012, 2014 to 2017, 2019 to 2021

Example reply from a 2026 Subaru Outback.

Bits 0 to 15 of the reply, 16 bits.

0x08FC = 2300 → (2300 ÷ 4) = 575 rpm

Formula
(val ÷ 4)
Range
0 to 16383.75 rpm
Unit
rpm

Confirmed for 2022 to 2026. In testing for 1994 to 2010, 2012, 2014. Supported for 2013, 2018. Not supported for 2011, 2015 to 2017, 2019 to 2021.

Transmission turbine speed OUTBACK_TRANS_TURBINE_SPDConfirmed

  • Request22 12 98
  • Service 22DID 1298
  • Module7E0 → 7E8
  • Every250 ms
  • Testing for 1994 to 2017, 2020, 2022 to 2026

Example reply from a 2021 Subaru Outback.

Bits 0 to 15 of the reply, 16 bits.

0x0000 = 0 → 0 rpm

Formula
val
Range
0 to 65535 rpm
Unit
rpm

Confirmed for 2018 to 2019, 2021. In testing for 1994 to 2012, 2014 to 2017, 2020, 2022. Not supported for 2013, 2023 to 2026.

Turbine revolution speed OUTBACK_TURBINE_REVOLUTION

  • Request22 11 CB
  • Service 22DID 11CB
  • Module7E1 → 7E9
  • Every250 ms
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val × 32)
Range
0 to 2097120 rpm
Unit
rpm

In testing for 1994 to 2012, 2014 to 2017, 2020, 2022. Not supported for 2013, 2018 to 2019, 2021, 2023 to 2026.

Turbine speed OUTBACK_TURBINE_SPEEDConfirmed

  • Request22 10 CB
  • Service 22DID 10CB
  • Module7A3 → 7AB
  • Every1 s
  • Testing for 1994 to 2019, 2021

Example reply from a 2026 Subaru Outback.

Bits 0 to 7 of the reply, 8 bits.

0x17 = 23 → (23 × 32) = 736 rpm

Formula
(val × 32)
Range
0 to 8160 rpm
Unit
rpm

Confirmed for 2022 to 2026. In testing for 1994 to 2010, 2012, 2014. Supported for 2020. Not supported for 2011, 2013, 2015 to 2019, 2021.

Vehicle speed VSSSAE J1979Confirmed

Pelican can show this parameter as the speed.

  • Request01 0D
  • Service 01PID 0D
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255 km/h
Unit
km/h

Confirmed for 2010 to 2011, 2013 to 2016, 2018 to 2025. Supported for 2012, 2017.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.