Pelican
Get the app

Renault Megane

Drivetrain parameters

The Renault Megane has 1 drivetrain parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Driving type MEGANE_DRIVE_TYPEConfirmed

  • Request22 4B 3C
  • Service 22DID 4B3C
  • Module740 → 760
  • Every1 s
  • Testing for 1995 to 2017, 2020 to 2026

Example reply from a 2019 Renault Megane.

Bits 0 to 7 of the reply, 8 bits.

0x01 = 1 → 1

Formula
val
Range
0 to 255
Unit
Number

Confirmed for 2018 to 2019. In testing for 1995 to 2007, 2009 to 2010, 2012 to 2017, 2020, 2022 to 2023, 2026. Not supported for 2008, 2011, 2021, 2024 to 2025.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Driving type MEGANE_DRIVE_TYPEConfirmed

  • Request22 4B 3C
  • Service 22DID 4B3C
  • Module740 → 760
  • Every1 s
  • Testing for 1995 to 2017, 2020 to 2026

Example reply from a 2019 Renault Megane.

Bits 0 to 7 of the reply, 8 bits.

0x01 = 1 → 1

Formula
val
Range
0 to 255
Unit
Number

Confirmed for 2018 to 2019. In testing for 1995 to 2007, 2009 to 2010, 2012 to 2017, 2020, 2022 to 2023, 2026. Not supported for 2008, 2011, 2021, 2024 to 2025.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.