Renault KwidLight parametersThe Renault Kwid has 1 light parameter.● Confirmed◆ In testing○ Supported× Not supportedHow to read parameter cardsHow to read a parameter cardLow beams on RENAULT_LOW_BEAMRequest22 41 86Service 22DID 4186Module745 → 765Every3 sTestingBits 0 to 15 of the reply, 16 bits.FormulavalRange0 to 65535UnitNumberIn testing for 2015 to 2026.The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.Where the parameter is in the response, and how Pelican converts the raw value into a value.A real reply, decoded. The raw value comes first, then the reading.Which model years have tested this parameter.Low beams on RENAULT_LOW_BEAMRequest22 41 86Service 22DID 4186Module745 → 765Every3 sTestingBits 0 to 15 of the reply, 16 bits.FormulavalRange0 to 65535UnitNumberIn testing for 2015 to 2026.
