Pelican
Get the app

Renault Captur

ECU parameters

The Renault Captur has 3 ECU parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Fault counter RENAULT_FAULT_CNT

  • Request22 4B 05
  • Service 22DID 4B05
  • Module740 → 760
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 2013 to 2019, 2021 to 2026. Not supported for 2020.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Fault counter RENAULT_FAULT_CNT

  • Request22 4B 05
  • Service 22DID 4B05
  • Module740 → 760
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 2013 to 2019, 2021 to 2026. Not supported for 2020.

Fault cycles since disappeared RENAULT_FAULT_CYCLES

  • Request22 4B 08
  • Service 22DID 4B08
  • Module740 → 760
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 2013 to 2019, 2021 to 2026. Not supported for 2020.

Supplier number RENAULT_SUPPLIER_NUM

  • Request22 4B 3D
  • Service 22DID 4B3D
  • Module740 → 760
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535
Unit
Number

In testing for 2013 to 2019, 2021 to 2026. Not supported for 2020.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.