Porsche Taycan

GPS parameters

The Porsche Taycan has 2 GPS parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Satellites, tracked TAYCAN_GPS_SATS_TRACKEDConfirmed

  • Request22 24 31
  • Service 22DID 2431
  • Module767 → 7D1
  • Every5 s
  • Testing for 2020 to 2021, 2023 to 2026

Example reply from a 2022 Porsche Taycan.

Bits 8 to 15 of the reply, 8 bits.

0x06 = 6 → 6

Formula
val
Range
0 to 255
Unit
Number

Confirmed for 2022. In testing for 2020 to 2021, 2023 to 2026.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Satellites, tracked TAYCAN_GPS_SATS_TRACKEDConfirmed

  • Request22 24 31
  • Service 22DID 2431
  • Module767 → 7D1
  • Every5 s
  • Testing for 2020 to 2021, 2023 to 2026

Example reply from a 2022 Porsche Taycan.

Bits 8 to 15 of the reply, 8 bits.

0x06 = 6 → 6

Formula
val
Range
0 to 255
Unit
Number

Confirmed for 2022. In testing for 2020 to 2021, 2023 to 2026.

Satellites, visible TAYCAN_GPS_SATS_VISIBLEConfirmed

  • Request22 24 31
  • Service 22DID 2431
  • Module767 → 7D1
  • Every5 s
  • Testing for 2020 to 2021, 2023 to 2026

Example reply from a 2022 Porsche Taycan.

Bits 0 to 7 of the reply, 8 bits.

0x02 = 2 → 2

Formula
val
Range
0 to 255
Unit
Number

Confirmed for 2022. In testing for 2020 to 2021, 2023 to 2026.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.