Transmission parameters

The Porsche Macan has 1 transmission parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Example reply from a 2025 Porsche Macan.

Bits 0 to 7 of the reply, 8 bits.

0x01 = 1 → REVERSE

Confirmed for 2018, 2021, 2024 to 2025. In testing for 2014 to 2017, 2019 to 2020, 2022 to 2023, 2026.

The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
Where the parameter is in the response, and how Pelican converts the raw value into a value.
A real reply, decoded. The raw value comes first, then the reading.
Which model years have tested this parameter.

Example reply from a 2025 Porsche Macan.

Bits 0 to 7 of the reply, 8 bits.

0x01 = 1 → REVERSE

Confirmed for 2018, 2021, 2024 to 2025. In testing for 2014 to 2017, 2019 to 2020, 2022 to 2023, 2026.