MG ZS EV

Engine parameters

The MG ZS EV has 3 engine parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Vehicle gateway status ZSEV_GWM_STATUSConfirmed

  • Request22 D0 01
  • Service 22DID D001
  • Module710 → 718
  • Every4 s
  • Testing for 2019

Example reply from a 2024 MG ZS EV.

Bits 0 to 7 of the reply, 8 bits.

0x00 = 0 → 0

Formula
val
Range
0 to 255
Unit
Number

Confirmed for 2020 to 2024. In testing for 2019.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Ignition state ZSEV_IGN

  • Request22 B1 8C
  • Service 22DID B18C
  • Module7E3 → 7EB
  • Every5 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 2019 to 2026.

Radiator fan state ZSEV_RAD_FAN

  • Request22 BB 91
  • Service 22DID BB91
  • Module7E3 → 7EB
  • Every5 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 2019 to 2026.

Vehicle gateway status ZSEV_GWM_STATUSConfirmed

  • Request22 D0 01
  • Service 22DID D001
  • Module710 → 718
  • Every4 s
  • Testing for 2019

Example reply from a 2024 MG ZS EV.

Bits 0 to 7 of the reply, 8 bits.

0x00 = 0 → 0

Formula
val
Range
0 to 255
Unit
Number

Confirmed for 2020 to 2024. In testing for 2019.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.