Pelican
Get the app

Mercedes-Benz CLA 200

Engine parameters

The Mercedes-Benz CLA 200 has 3 engine parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Distance to next service MERCEDES_SERVICE_DIST

  • Request22 65 04
  • Service 22DID 6504
  • Module7E5
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535 km
Unit
km

In testing for 2013 to 2026.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Distance to next service MERCEDES_SERVICE_DIST

  • Request22 65 04
  • Service 22DID 6504
  • Module7E5
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535 km
Unit
km

In testing for 2013 to 2026.

Master break cylinder pressure MERCEDES_MASTER_BREAK_CYLINDER_PRESSURE

  • Request22 20 02
  • Service 22DID 2002
  • Module7E2 → 7EA
  • Every250 ms
  • Testing

Bits 96 to 111 of the reply, 16 bits. The value is signed.

Formula
(val × 153 ÷ 10000)
Range
-500 to 500 bar
Unit
bar

In testing for 2013 to 2026.

Vacuum break pressure MERCEDES_VACUUM_BREAK_PRESSURE

  • Request22 20 02
  • Service 22DID 2002
  • Module7E2 → 7EA
  • Every250 ms
  • Testing

Bits 144 to 159 of the reply, 16 bits.

Formula
(val ÷ 1000)
Range
0 to 65 bar
Unit
bar

In testing for 2013 to 2026.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.