Pelican
Get the app

Mazda MX-5

Cruise control parameters

The Mazda MX-5 has 1 cruise control parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Cruise control voltage MX5_SCCS_VConfirmed

0.0V = On/Off Switch depressed, 1.1V = Cancel depressed, 3.1V = Set/- switch depressed, 4.2V = Res/+ switch depressed, 5.0V = Normal

  • Request22 A2 16
  • Service 22DID A216
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 1989 to 2005, 2008, 2012

Example reply from a 2015 Mazda MX-5.

Bits 0 to 15 of the reply, 16 bits.

0xFFC0 = 65472 → (65472 × 5 ÷ 65535) = 4.995193 V

Formula
(val × 5 ÷ 65535)
Range
0 to 5 V
Unit
V

Confirmed for 2006 to 2007, 2009 to 2011, 2013 to 2015. In testing for 1989 to 2001, 2003 to 2005, 2008, 2012. Not supported for 2002, 2016, 2019 to 2020.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Cruise control voltage MX5_SCCS_VConfirmed

0.0V = On/Off Switch depressed, 1.1V = Cancel depressed, 3.1V = Set/- switch depressed, 4.2V = Res/+ switch depressed, 5.0V = Normal

  • Request22 A2 16
  • Service 22DID A216
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 1989 to 2005, 2008, 2012

Example reply from a 2015 Mazda MX-5.

Bits 0 to 15 of the reply, 16 bits.

0xFFC0 = 65472 → (65472 × 5 ÷ 65535) = 4.995193 V

Formula
(val × 5 ÷ 65535)
Range
0 to 5 V
Unit
V

Confirmed for 2006 to 2007, 2009 to 2011, 2013 to 2015. In testing for 1989 to 2001, 2003 to 2005, 2008, 2012. Not supported for 2002, 2016, 2019 to 2020.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.