Hyundai SonataTransmission parametersThe Hyundai Sonata has 1 transmission parameter.● Confirmed◆ In testing○ Supported× Not supportedHow to read parameter cardsHow to read a parameter cardReverse gear selected SONATA_GEAR_RConfirmedRequest22 BC 04Service 22DID BC04Module770 → 778Every1 sExample reply from a 2026 Hyundai Sonata.Bit 35 of the reply.0b0 = 0 → 0FormulavalRange0 to 1UnitNo or yesConfirmed for 2021 to 2026. Not supported for 2010 to 2011, 2013 to 2017, 2019 to 2020.The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.Where the parameter is in the response, and how Pelican converts the raw value into a value.A real reply, decoded. The raw value comes first, then the reading.Which model years have tested this parameter.Reverse gear selected SONATA_GEAR_RConfirmedRequest22 BC 04Service 22DID BC04Module770 → 778Every1 sExample reply from a 2026 Hyundai Sonata.Bit 35 of the reply.0b0 = 0 → 0FormulavalRange0 to 1UnitNo or yesConfirmed for 2021 to 2026. Not supported for 2010 to 2011, 2013 to 2017, 2019 to 2020.
