Hyundai IONIQ 5

Transmission parameters

The Hyundai IONIQ 5 has 4 transmission parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Gear position D IONIQ5_GEAR_D

  • Request21 01
  • Service 21PID 01
  • Module7E2 → 7EA
  • Every250 ms
  • Testing

Bit 44 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2018, 2021. Not supported for 2022 to 2026.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Gear position D IONIQ5_GEAR_D

  • Request21 01
  • Service 21PID 01
  • Module7E2 → 7EA
  • Every250 ms
  • Testing

Bit 44 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2018, 2021. Not supported for 2022 to 2026.

Gear position N IONIQ5_GEAR_N

  • Request21 01
  • Service 21PID 01
  • Module7E2 → 7EA
  • Every250 ms
  • Testing

Bit 45 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2018, 2021. Not supported for 2022 to 2026.

Gear position P IONIQ5_GEAR_P

  • Request21 01
  • Service 21PID 01
  • Module7E2 → 7EA
  • Every250 ms
  • Testing

Bit 47 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2018, 2021. Not supported for 2022 to 2026.

Gear position R IONIQ5_GEAR_R

  • Request21 01
  • Service 21PID 01
  • Module7E2 → 7EA
  • Every250 ms
  • Testing

Bit 46 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2018, 2021. Not supported for 2022 to 2026.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.