Pelican
Get the app

Hyundai Genesis Coupe

Electrical parameters

The Hyundai Genesis Coupe has 2 electrical parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Cluster voltage HYUNDAI_CLUSTER_VOLTAGE

Pelican can show this parameter as the starter battery voltage.

  • Request22 B0 02
  • Service 22DID B002
  • Module7C6 → 7CE
  • Every1 s
  • Testing

Bits 40 to 47 of the reply, 8 bits.

Formula
(val ÷ 12.8)
Range
0 to 18 V
Unit
V

In testing for 2008 to 2016.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Cluster voltage HYUNDAI_CLUSTER_VOLTAGE

Pelican can show this parameter as the starter battery voltage.

  • Request22 B0 02
  • Service 22DID B002
  • Module7C6 → 7CE
  • Every1 s
  • Testing

Bits 40 to 47 of the reply, 8 bits.

Formula
(val ÷ 12.8)
Range
0 to 18 V
Unit
V

In testing for 2008 to 2016.

Cluster voltage HYUNDAI_CRUZ_CLUSTER_VOLTAGE

  • Request22 B0 02
  • Service 22DID B002
  • Module7C6 → 7CE
  • Every1 s
  • Testing

Bits 40 to 47 of the reply, 8 bits.

Formula
(val ÷ 12.8)
Range
0 to 18 V
Unit
V

In testing for 2008 to 2016.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.