Honda Accord

ECU parameters

The Honda Accord has 2 ECU parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Oil pressure ACCORD_EOP

  • Request22 22 03
  • Service 22DID 2203
  • ModuleDA1D → 1D
  • Every1 s
  • Testing

Bits 72 to 79 of the reply, 8 bits.

Formula
val
Range
0 to 255 kPa
Unit
kPa

In testing for 1988 to 2002, 2005 to 2006, 2008, 2012 to 2016, 2019, 2021 to 2022, 2026. Not supported for 2003 to 2004, 2007, 2009 to 2011, 2017 to 2018, 2020, 2023 to 2025.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Oil pressure ACCORD_EOP

  • Request22 22 03
  • Service 22DID 2203
  • ModuleDA1D → 1D
  • Every1 s
  • Testing

Bits 72 to 79 of the reply, 8 bits.

Formula
val
Range
0 to 255 kPa
Unit
kPa

In testing for 1988 to 2002, 2005 to 2006, 2008, 2012 to 2016, 2019, 2021 to 2022, 2026. Not supported for 2003 to 2004, 2007, 2009 to 2011, 2017 to 2018, 2020, 2023 to 2025.

Variable valve control ACCORD_VTEC_CTRLConfirmed

  • Request22 26 12
  • Service 22DID 2612
  • ModuleDA10 → 10
  • Every250 ms
  • Testing for 1988 to 2017, 2019 to 2022, 2026

Bits 168 to 175 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

Confirmed for 2018, 2023 to 2025. In testing for 1988 to 2003, 2005 to 2008, 2012 to 2016, 2019, 2021 to 2022, 2026. Not supported for 2004, 2009 to 2011, 2017, 2020.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.