Clock parameters
The Holden Cruze has 3 clock parameters.
● Confirmed◆ In testing○ Supported× Not supported
Time since engine start HOLDEN_RUNTMConfirmed
- Request
22 11 A1 - Service 22
DID 11A1 - Module
DA11 → 2AF111 - Every
1 s - Testing
Example reply from a 2015 Holden Cruze.
Bits 0 to 15 of the reply, 16 bits.
0x0000 = 0 → 0 s
- Formula
val- Range
- 0 to 65535 s
- Unit
- s
Confirmed for 2013, 2015. In testing for 2002 to 2006, 2009 to 2012, 2014, 2016.
Time since engine start HOLDEN_RUNTM_V2
- Request
22 11 A1 - Service 22
DID 11A1 - Module
7E0 - Every
1 s - Testing
Bits 0 to 15 of the reply, 16 bits.
- Formula
val- Range
- 0 to 65535 s
- Unit
- s
In testing for 2002 to 2006, 2009 to 2016.
Time since engine start RUNTMSAE J1979Confirmed
Increments while the engine is running. Freezes if the engine stalls. Resets to zero during every control module power-up and when entering the key-on, engine off position. Limited to 65,535 seconds and will not wrap around to zero.
- Request
01 1F - Service 01
PID 1F - Module
7E0 → 7E8 - Every
1 s
Bits 0 to 15 of the reply, 16 bits.
- Formula
val- Range
- 0 to 65535 s
- Unit
- s
Confirmed for 2015. Supported for 2013.