Pelican
Get the app

Ford Flex

FORD_AAT parameters

The Ford Flex has 1 FORD_AAT parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Ambient air temperature sensor voltage FORD_AAT_VConfirmed

  • Request22 03 BA
  • Service 22DID 03BA
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Example reply from a 2016 Ford Flex.

Bits 0 to 15 of the reply, 16 bits.

0x01AA = 426 → (426 × 0.0048875855) = 2.082111 V

Formula
(val × 0.0048875855)
Range
0 to 5 V
Unit
V

Confirmed for 2016. In testing for 2009 to 2012, 2014 to 2015, 2017 to 2019. Not supported for 2013.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Ambient air temperature sensor voltage FORD_AAT_VConfirmed

  • Request22 03 BA
  • Service 22DID 03BA
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Example reply from a 2016 Ford Flex.

Bits 0 to 15 of the reply, 16 bits.

0x01AA = 426 → (426 × 0.0048875855) = 2.082111 V

Formula
(val × 0.0048875855)
Range
0 to 5 V
Unit
V

Confirmed for 2016. In testing for 2009 to 2012, 2014 to 2015, 2017 to 2019. Not supported for 2013.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.