Pelican
Get the app

Ford Explorer

EXPLORER_ACC parameters

The Ford Explorer has 1 EXPLORER_ACC parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Accelerator pedal position EXPLORER_ACC_POSConfirmed

  • Request22 03 2B
  • Service 22DID 032B
  • Module7E0
  • Every250 ms
  • Testing for 1990 to 2010, 2012, 2014, 2024

Example reply from a 2026 Ford Explorer.

Bits 0 to 7 of the reply, 8 bits.

0x00 = 0 → (0 × 0.5) = 0 %

Formula
(val × 0.5)
Range
0 to 100 %
Unit
%

Confirmed for 2011, 2013, 2015 to 2023, 2025 to 2026. In testing for 1990 to 2004, 2006 to 2007, 2009 to 2010, 2012, 2014. Not supported for 2005, 2008, 2024.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Accelerator pedal position EXPLORER_ACC_POSConfirmed

  • Request22 03 2B
  • Service 22DID 032B
  • Module7E0
  • Every250 ms
  • Testing for 1990 to 2010, 2012, 2014, 2024

Example reply from a 2026 Ford Explorer.

Bits 0 to 7 of the reply, 8 bits.

0x00 = 0 → (0 × 0.5) = 0 %

Formula
(val × 0.5)
Range
0 to 100 %
Unit
%

Confirmed for 2011, 2013, 2015 to 2023, 2025 to 2026. In testing for 1990 to 2004, 2006 to 2007, 2009 to 2010, 2012, 2014. Not supported for 2005, 2008, 2024.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.