Ford EcoSport

FORD_HPFP parameters

The Ford EcoSport has 2 FORD_HPFP parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

High pressure fuel pressure desired FORD_HPFP_DESConfirmed

  • Request22 03 DC
  • Service 22DID 03DC
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Example reply from a 2019 Ford EcoSport.

Bits 0 to 15 of the reply, 16 bits.

0x0025 = 37 → (37 × 1.450377397) = 53.663964 psi

Formula
(val × 1.450377397)
Range
0 to 3500 psi
Unit
psi

Confirmed for 2018 to 2019. In testing for 2003 to 2017, 2020 to 2022.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

High pressure fuel pressure desired FORD_HPFP_DESConfirmed

  • Request22 03 DC
  • Service 22DID 03DC
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Example reply from a 2019 Ford EcoSport.

Bits 0 to 15 of the reply, 16 bits.

0x0025 = 37 → (37 × 1.450377397) = 53.663964 psi

Formula
(val × 1.450377397)
Range
0 to 3500 psi
Unit
psi

Confirmed for 2018 to 2019. In testing for 2003 to 2017, 2020 to 2022.

High pressure fuel rail sensor voltage FORD_HPFP_VConfirmed

  • Request22 03 24
  • Service 22DID 0324
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val × 0.0048875855)
Range
0 to 5 V
Unit
V

Confirmed for 2018 to 2019. In testing for 2003 to 2017, 2020 to 2022.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.