Pelican
Get the app

Ford Bronco Sport

Cruise control parameters

The Ford Bronco Sport has 1 cruise control parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Target vehicle speed BRONCOSPORT_CC_TGT_VSSConfirmed

The speed of the vehicle ahead of you.

  • Request22 A2 24
  • Service 22DID A224
  • Module764 → 76C
  • Every250 ms
  • Testing for 2021 to 2024, 2026

Example reply from a 2025 Ford Bronco Sport.

Bits 0 to 15 of the reply, 16 bits. The value is signed.

0x0000 = 0 → (0 × 3.6 ÷ 10) = 0 km/h

Formula
(val × 3.6 ÷ 10)
Range
-736 to 736 km/h
Unit
km/h

Confirmed for 2025. In testing for 2026. Not supported for 2021 to 2024.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Target vehicle speed BRONCOSPORT_CC_TGT_VSSConfirmed

The speed of the vehicle ahead of you.

  • Request22 A2 24
  • Service 22DID A224
  • Module764 → 76C
  • Every250 ms
  • Testing for 2021 to 2024, 2026

Example reply from a 2025 Ford Bronco Sport.

Bits 0 to 15 of the reply, 16 bits. The value is signed.

0x0000 = 0 → (0 × 3.6 ÷ 10) = 0 km/h

Formula
(val × 3.6 ÷ 10)
Range
-736 to 736 km/h
Unit
km/h

Confirmed for 2025. In testing for 2026. Not supported for 2021 to 2024.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.