Pelican
Get the app

Chevrolet Blazer

Clock parameters

The Chevrolet Blazer has 1 clock parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Time since engine start BLAZER_RUNTMConfirmed

  • Request22 11 A1
  • Service 22DID 11A1
  • Module7E0
  • Every1 s
  • Testing for 1988 to 2012, 2019, 2021, 2025 to 2026

Example reply from a 2024 Chevrolet Blazer.

Bits 0 to 15 of the reply, 16 bits.

0x0035 = 53 → 53 s

Formula
val
Range
0 to 65535 s
Unit
s

Confirmed for 2020, 2022 to 2024. In testing for 2001 to 2012, 2019, 2021, 2026. Not supported for 1999 to 2000, 2025.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Time since engine start BLAZER_RUNTMConfirmed

  • Request22 11 A1
  • Service 22DID 11A1
  • Module7E0
  • Every1 s
  • Testing for 1988 to 2012, 2019, 2021, 2025 to 2026

Example reply from a 2024 Chevrolet Blazer.

Bits 0 to 15 of the reply, 16 bits.

0x0035 = 53 → 53 s

Formula
val
Range
0 to 65535 s
Unit
s

Confirmed for 2020, 2022 to 2024. In testing for 2001 to 2012, 2019, 2021, 2026. Not supported for 1999 to 2000, 2025.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.