BMW iX3

Battery parameters

The BMW iX3 has 2 battery parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

HV battery charge IX3_HVBAT_SOCConfirmed

Pelican can show this parameter as the state of charge.

  • Request22 E5 CE
  • Service 22DID E5CE
  • Module6F1 → 607
  • Every1 s
  • Testing for 2020

Example reply from a 2025 BMW iX3.

Bits 0 to 15 of the reply, 16 bits.

0x1598 = 5528 → (5528 ÷ 100) = 55.28 %

Formula
(val ÷ 100)
Range
0 to 100 %
Unit
%

Confirmed for 2021 to 2025. In testing for 2020.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

HV battery charge IX3_HVBAT_SOCConfirmed

Pelican can show this parameter as the state of charge.

  • Request22 E5 CE
  • Service 22DID E5CE
  • Module6F1 → 607
  • Every1 s
  • Testing for 2020

Example reply from a 2025 BMW iX3.

Bits 0 to 15 of the reply, 16 bits.

0x1598 = 5528 → (5528 ÷ 100) = 55.28 %

Formula
(val ÷ 100)
Range
0 to 100 %
Unit
%

Confirmed for 2021 to 2025. In testing for 2020.

HV battery health IX3_HVBAT_SOHConfirmed

Pelican can show this parameter as the state of health.

  • Request22 E5 C7
  • Service 22DID E5C7
  • Module6F1 → 607
  • Every1 s
  • Testing for 2020

Bits 24 to 31 of the reply, 8 bits.

Formula
val
Range
0 to 100 %
Unit
%

Confirmed for 2021 to 2025. In testing for 2020.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.