Pelican
Get the app

Audi S3

GPS parameters

The Audi S3 has 2 GPS parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Satellites, tracked AUDI_GPS_SATS_TRACKED

  • Request22 24 31
  • Service 22DID 2431
  • Module767 → 7D1
  • Every1 s
  • Testing

Bits 8 to 15 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 1999 to 2003, 2006 to 2012, 2014 to 2015, 2017, 2019 to 2026. Not supported for 2016, 2018.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Satellites, tracked AUDI_GPS_SATS_TRACKED

  • Request22 24 31
  • Service 22DID 2431
  • Module767 → 7D1
  • Every1 s
  • Testing

Bits 8 to 15 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 1999 to 2003, 2006 to 2012, 2014 to 2015, 2017, 2019 to 2026. Not supported for 2016, 2018.

Satellites, visible AUDI_GPS_SATS_VISIBLE

  • Request22 24 31
  • Service 22DID 2431
  • Module767 → 7D1
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 1999 to 2003, 2006 to 2012, 2014 to 2015, 2017, 2019 to 2026. Not supported for 2016, 2018.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.