Pelican
Get the app

Audi Q5

AUDI_PQ35_TIME_LAST parameters

The Audi Q5 has 1 AUDI_PQ35_TIME_LAST parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Time since last regeneration AUDI_PQ35_TIME_LAST_REGENConfirmed

  • Request22 11 5E
  • Service 22DID 115E
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Example reply from a 2015 Audi Q5.

Bits 0 to 31 of the reply, 32 bits.

0x00002099 = 8345 → (8345 ÷ 10066666667) = 0.000001 min

Formula
(val ÷ 10066666667)
Range
0 to 0.426 min
Unit
min

Confirmed for 2015. In testing for 2008 to 2014, 2016 to 2020, 2022 to 2026. Not supported for 2021.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Time since last regeneration AUDI_PQ35_TIME_LAST_REGENConfirmed

  • Request22 11 5E
  • Service 22DID 115E
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Example reply from a 2015 Audi Q5.

Bits 0 to 31 of the reply, 32 bits.

0x00002099 = 8345 → (8345 ÷ 10066666667) = 0.000001 min

Formula
(val ÷ 10066666667)
Range
0 to 0.426 min
Unit
min

Confirmed for 2015. In testing for 2008 to 2014, 2016 to 2020, 2022 to 2026. Not supported for 2021.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.